检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:冯宇 王博龙 程硕 倪继宏 董思蒙 FENG Yu;WANG Bolong;CHENG Shuo;NI Jihong;DONG Simeng(State Grid Liaoning Information and Communication Company,Shenyang,Liaoning 110006,China;State Grid Yingkou Electric Power Supply Company,Yingkou,Liaoning 115002,China)
机构地区:[1]国网辽宁信通公司,辽宁沈阳110006 [2]国网营口供电公司,辽宁营口115002
出 处:《计算技术与自动化》2024年第2期52-56,共5页Computing Technology and Automation
摘 要:以降低变电站通信网络时延为目标,基于时间敏感网络设计了一种低时延控制方法。首先,在变电站通信网络的站控层和过程层中,利用时间敏感网络交换机组建时间敏感子网络,再将不同交换机终端辨识为多个线性参数模型。然后,利用模糊控制方法控制交换机同步时钟的误差,根据模糊C均值聚类方法确定低时延控制的模糊规则前件,利用时间敏感网络的参数辨识获取模糊规则后件。最后,依据模糊控制前件与后件,结合模糊控制与广义预测控制,实现时间敏感网络时延的反馈校正。实验结果表明,采用该方法控制变电站通信网络时延量后,网络通信最大时延被控制在100μs以内,最大时延抖动被控制在20μs以内,说明该方法有效实现了设计预期。With the goal of reducing the delay of substation communication network,this paper designs a low delay control method based on time sensitive networks.Firstly,in the station control layer and process layer of the substation communication network,time sensitive network switches are used to construct time sensitive subnetworks,and different switch terminals are identified as multiple linear parameter models.Then,fuzzy control method is used to control the synchronization clock error of the switch,and fuzzy rule antecedents for low latency control are determined based on fuzzy C-means clustering method.Fuzzy rule antecedents are obtained through parameter identification of time sensitive networks.Finally,based on the pre and post components of fuzzy control,combined with fuzzy control and generalized predictive control,feedback correction of time sensitive network delay is achieved.The experimental results show that after using this method to control the delay of the substation communication network,the maximum delay of network communication is controlled within 100μs,and the maximum delay jitter is controlled within 20μs,indicating that this method effectively achieves the design expectations.
关 键 词:时间敏感网络 变电站 通信网络 低时延控制 交换机 模糊控制方法
分 类 号:TM73[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.91