18650钢壳电池表面涂油设备的设计与研究  

Design and Research of Surface Oiling Equipment for 18650 Steel Shell Batteries

作　　者：谢权元 胡正西[1] 彭斌 唐柳 黄永强 丁红业 XIE Quanyuan;HU Zhengxi;PENG Bin;TANG Liu;HUANG Yongqiang;DING Hongye(School of Artificial Intelligence,Hezhou University,Hezhou,Guangxi 542899,China)

机构地区：[1]贺州学院人工智能学院,广西贺州542899

出　　处：《自动化应用》2024年第11期193-195,共3页Automation Application

基　　金：贺州学院校级项目(HZUJS202206);大学生创新创业项目(202011838126,202011838130)。

摘　　要：18650钢壳电池表面涂油设备是根据18650钢壳电池的基本外形尺寸,采用非标设计理念设计的,该设备由上料机构、涂油机构、下料机构3个部分构成。非标件通过SolidWorks软件建模完成,标准件通过计算选型。通过SolidWorks软件将非标件与标准件装配成完整的设备,并设计了能实现18650钢壳电池表面涂油的气动系统,最后通过三菱PLC控制整台设备的运行,为18650电池提供了一种高效的涂油解决方案。The surface oiling equipment for 18650 steel shell batteries is designed based on the basic external dimensions of 18650 steel shell batteries and adopts non-standard design concepts.The equipment consists of three parts:Loading mechanism,oiling mechanism,and unloading mechanism.Non standard parts are modeled using SolidWorks software,while standard parts are selected through calculation.By using SolidWorks software,non-standard and standard components were assembled into a complete device,and a pneumatic system was designed to achieve surface oiling of 18650 steel shell batteries.Finally,the operation of the entire device was controlled by Mitsubishi PLC,providing an efficient oiling solution for 18650 batteries.

关 键 词：18650钢壳电池 涂油设备 三菱PLC 

分 类 号：TB657.2[一般工业技术—制冷工程] TP242[自动化与计算机技术—检测技术与自动化装置]