基于偏振视觉的环形构件表面形貌重构  

Surface Topography Reconstruction of Ring Components Based on Polarization Vision

作　　者：朱乾皓 陈景铭 张礼华[2] 汪振耀 ZHU Qianhao;CHEN Jingming;ZHANG Lihua;WANG Zhenyao(Zhangjiagang Zhonghuan Hailu High-End Equipment Co.,Ltd.,Zhangjiagang Jiangsu 215626,China;School of Mechanical Engineering,Jiangsu University of Science and Technology,Zhenjiang Jiangsu 212114,China)

机构地区：[1]张家港中环海陆高端装备股份有限公司,江苏张家港215626 [2]江苏科技大学机械工程学院,江苏镇江212114

出　　处：《机床与液压》2024年第12期46-51,共6页Machine Tool & Hydraulics

摘　　要：为了增强对环形构件表面的质量检测能力,提出一种基于单目DoFP偏振相机的FSV偏振检测方法。根据偏振反射分离出的漫反射信息,对基于FSV的偏振三维重建模型进行校正。利用偏振数据得到增强的二维表面图像,并进行相应的偏振三维建模。实验结果表明,与传统成像系统和非FSV偏振成像系统相比,所提出的检测方法测得的DoP图像在图像评价指标上提升3%以上,重建的三维模型和真实检测表面的均方根误差为0.35,大大提高了对环形构件表面的质量检测能力。In order to enhance the quality inspection of ring component surfaces,a FSV polarisation detection method based on a monocular DoFP polarisation camera was proposed.The FSV-based polarimetric 3D reconstruction model was calibrated based on the diffuse reflection information separated from the polarimetric reflections.Enhanced 2D surface images were obtained using the polarisation data and the corresponding polarisation 3D modelling was performed.The experimental results show that the DoP images measured by the proposed detection method are more than 3% better in terms of image evaluation index compared to conventional imaging systems and non-FSV polarisation imaging systems,and the root-mean-square error between the reconstructed 3D model and the real inspection surface is 0.35,which greatly improves the quality inspection capability of the ring components surface.

关 键 词：环形构件 偏振成像 全斯托克斯矢量(FSV) 偏振反射分离 偏振三维重构 

分 类 号：TM7[电气工程—电力系统及自动化]