智能化气垫带式输送机性能测试平台设计  

Design of intelligent air cushion belt conveyor performance test platform

作　　者：王明旭[1,2] 解迎鑫 刘梦飞 宣秋泽 王慧心 田颖斌 WANG Mingxu;XIE Yingxin;LIU Mengfei;XUAN Qiuze;WANG Huixin;TIAN Yingbin(School of Electromechanical Engineering,Henan University of Technology,Zhengzhou 450001,China;Henan Key Laboratory of Grain and Oil Storage Facility&Safety,Henan University of Technology,Zhengzhou 450001,China;Suzhou Jiesai Machinery Co.,Ltd.,Taicang 215400,China)

机构地区：[1]河南工业大学机电工程学院,河南郑州450001 [2]河南工业大学河南省粮油仓储建筑与安全重点实验室,河南郑州450001 [3]苏州捷赛机械股份有限公司,江苏太仓215400

出　　处：《实验技术与管理》2024年第5期181-187,共7页Experimental Technology and Management

基　　金：河南省科技研发计划联合基金(232103810084);河南省粮油仓储建筑与安全重点实验室开放课题基金(2021KF-B02);河南省教育厅青年骨干教师项目(2020GGJS088)。

摘　　要：该文设计了一种智能化气垫带式输送机性能测试平台,通过调节气室入口的风压、风速,气孔排布方式、孔径及孔间距,可探究气室气压、气膜边缘风速及气膜厚度的变化规律。平台基于可控文丘里装置的反馈系统控制气垫带式输送机的气流,实验平台可以反映输入气流参数与形成气膜参数之间的耦合关系,将抽象的相关知识具象化,加深学生对气垫式输送装备的理解。[Objective]Air cushion belt conveyor is widely used in the transportation industry,but the related research on performance improvement stays in the theoretical aspect.For transportation equipment,it is necessary to balance the relationship between transportation efficiency and energy consumption.In order to improve transportation efficiency,increasing belt speed and increasing bandwidth are the main schemes to be considered.Improving the bandwidth requires changing the corresponding bracket to increase the cost of equipment renewal,compared with improving the band speed is the best research direction.The stability of the gas film is an important factor affecting the belt speed.When the belt speed is increased,the gas film needs to have stronger stiffness to resist the interference caused by fluctuations and high-speed movement of the conveyor belt.In order to solve these problems,we can improve the stiffness of the gas film and reduce the fluctuation caused by the device.[Methods]To improve the stiffness of gas film,it is necessary to study the influence of gas film formation factors by experiment.In order to reduce the fluctuation caused by the device,it is necessary to study the structure of the device itself.Fluctuations in installation accuracy are unavoidable.This paper proposes to install a pressure regulator in front of each gas chamber to reduce the fluctuation caused by different gas film parameters in the transport direction by reducing the numerical difference of input gas parameters in each chamber.Aiming at the research on the stability of the gas film,the experimental platform designed in this paper made the disc groove into a detachable form,and found the change law of the gas film stiffness by adjusting the air pressure,wind speed,porosity arrangement,aperture and hole spacing at the entrance of the gas chamber.To reduce the fluctuation caused by the uneven input flow parameters of the gas chamber;Aiming at the structure design of the pressure regulator,the feedback system composed of controllable

关 键 词：气垫带式输送机 可控文丘里装置 气膜 传感器 反馈系统 

分 类 号：TH222[机械工程—机械制造及自动化]