低lnZ条件下6013铝合金的热压缩变形行为  

Hot Compression Deformation Behavior of 6013 Aluminum Alloy by Low lnZ

作　　者：伍英明 姜科达 刘胜胆[1,2,3] 范世通 覃秋慧 李俊[1,3] WU Yingming;JIANG Keda;LIU Shengdan;FAN Shitong;QIN Qiuhui;LI Jun(School of Materials Science and Engineering,Central South University,Changsha 410083,China;National Key Laboratory of Science and Technology on High-strength Structural Materials,Central South University,Changsha 410083,China;Key Laboratory of Non-Ferrous Metal Materials Science and Engineering,Ministry of Education,Central South University,Changsha 410083,China;Taishan City Kam Kiu Aluminium Extrusion Co.,Ltd.Postdoctoral Innovation Base,Taishan 529261,China)

机构地区：[1]中南大学材料科学与工程学院,长沙410083 [2]中南大学轻质高强结构材料重点实验室,长沙410083 [3]中南大学有色金属材料科学与工程教育部重点实验室,长沙410083 [4]台山市金桥铝型材厂有限公司博士后创新实践基地,台山529261

出　　处：《材料研究学报》2024年第5期337-346,共10页Chinese Journal of Materials Research

基　　金：国家重点研发计划(2023YFB3710404)。

摘　　要：通过6013铝合金的热压缩模拟实验,研究了其在530~575℃、应变速率为0.001~0.1 s^(-1)条件下的热变形行为。基于电子背散射衍射技术分析了这种合金微观组织的演变及其动态软化机制,并用Zener-Hollomon(Z)参数表征变形温度和应变速率的综合影响。结果表明,这种合金的流变应力随着lnZ的增大而增大,在稳态条件下其变形激活能为217.3 kJ/mol。随着lnZ的增大,这种合金的再结晶面积分数和亚晶粒尺寸总体上呈线性降低的趋势。在23.91≤lnZ<29.55条件下动态再结晶是其主要的软化机制,其中几何动态再结晶占主导;而在29.55<lnZ≤30.24条件下,动态回复是其主要的软化机制。The hot deformation behavior of 6013 Al-alloy at 530~575℃and strain rate of 0.001~0.1 s^(-1)was studied by hot compression simulation test.Based on the electron backscatter diffraction technique,the microstructure evolution and dynamic softening mechanism were discussed,while the so called Ze-ner-Hollomon(Z)parameter was adopted to represent the combined effect of deformation temperature and strain rate.The results show that the flow stress of the alloy increases with the increase of ln Z,and the deformation activation energy of the alloy under steady state condition is 217.3 kJ/mol.With the in-crease of lnZ,the recrystallization area fraction and sub-grain size tend to decrease linearly.For 23.91≤lnZ<29.55,dynamic recrystallization is the main softening mechanism,in which geometric dynamic re-crystallization is dominant.For 29.55<lnZ≤30.24,dynamic recovery is the main softening mechanism.

关 键 词：金属材料 6013铝合金 本构方程 组织演变 软化机制 

分 类 号：TG146.2[一般工业技术—材料科学与工程]