检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:毕延森 高德利[1] 鲜保安 BI Yansen;GAO Deli;XIAN Baoan(Key Laboratory of Petroleum Engineering of the Ministry of Education,China University of Petroleum(Beijing),Beijing 102249;School of Resources and Environment,He’nan Polytechnic University,Jiaozuo 454000,He’nan,China)
机构地区:[1]中国石油大学(北京)石油工程教育部重点实验室,北京102249 [2]河南理工大学资源环境学院,河南焦作454000
出 处:《石油钻采工艺》2024年第1期119-129,共11页Oil Drilling & Production Technology
基 金:国家自然科学基金“复杂结构井工厂立体设计建设基础研究”(编号:52234002);国家自然科学基金“煤层气低产储层靶向改造增产关键理论及技术基础”(编号:42230814)。
摘 要:水平井煤层伤害后渗透性差、常规分段水力射流间距长,为提高近井壁煤层渗透性,优化设计了弹簧-液压式封隔器与注液短节,提出了以筛孔为喷嘴的煤层气水平井筛管密集分段径向射流增透方法。建立了单个筛孔径向射流破岩计算模型和近井壁煤岩增透渗流增量比计算模型,优化设计了筛管孔密、筛孔出口流速和射流排量,分析了井壁煤岩固相侵入带与滤液侵入带的渗透率比值Kγ、固相侵入带深度Hs对渗流增量比的影响规律。研究结果表明,弹簧-液压式封隔器采用了无骨架式胶筒、径向滑块和强力弹簧设计,解决了密集分段径向射流工具在筛管内的高频次封隔稳定性难题,实现了煤层气水平井筛管完井与射流增透一趟钻;在Hs=3.5 cm、Kγ=0.01条件下,筛孔径向水力射流间距减小为筛孔间距0.05 m,水平井段煤岩渗流增量比增加5.5%,实现了煤层水平井段密封分段径向射流增透作业。研究结果为解决采用筛管完井的煤层气水平井储层伤害难题提供技术指导,为近井壁煤岩增透作业提供理论支撑。The permeability of coal near shaft wall is low for the reservoir damage,and the space of conventional segmented hydraulic jetting is long.A method of dense segmented radial jet with pre-drilled holes as nozzles was proposed to improve the permeability of coal near shaft wall,and the spring-hydraulic packer and liquid injection nipple were designed and optimized for horizontal well completion with pre-drilled liner.The calculation model of single pre-drilled hole radial jetting and seepage increment ratio of coal breaking cave near shaft wall are established.The number of pre-drilled holes per meter,exit jetting velocity of pre-drilled hole and flow rate were optimized.The influence of permeability ratio Kγbetween the solid intrusive zone and the filtrate intrusive zone and the depth of solid intrusion zone Hs on the seepage increment ratio of coal near the shaft wall is analyzed.The results show that the spring-hydraulic packer with a design of non-skeleton rubber cylinders,radial sliders,and strong tensile spring,which improves the stability of high-frequency sealing of the dense segmented radial jetting tools within the pre-drilled liner,achieving completion and reservoir stimulation in one trip for coalbed methane horizontal well.Under the conditions of Hs=3.5 cm and Kγ=0.01,the radial hydraulic jetting space of the pre-drilled liner was reduced to the pre-drilled hole space of 0.05 m,and the seepage increment ratio of coal methane horizontal well increased by 5.5%with dense segmented radial jetting.The research results provide technical guidance for solving the reservoir damage challenge in coalbed methane horizontal wells completed with pre-drilled liner,and theoretical basis for permeability enhancement operations in coal near shaft wall.
分 类 号:TE257[石油与天然气工程—油气井工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.80