检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘顶立 李颖 徐志胜[2] 刘伟军[1] 黄遥[1] LIU Dingli;LI Ying;XU Zhisheng;LIU Weijun;HUANG Yao(School of Traffic and Transportation Engineering,Changsha University of Science and Technology,Changsha 410114,China;School of Civil Engineering,Central South University,Changsha 410075,China)
机构地区:[1]长沙理工大学交通运输工程学院,长沙410114 [2]中南大学土木工程学院,长沙410075
出 处:《清华大学学报(自然科学版)》2024年第6期1007-1015,共9页Journal of Tsinghua University(Science and Technology)
基 金:国家自然科学基金项目(52204202);湖南省自然科学基金项目(2023JJ40058);湖南省交通运输厅科技项目(202122)。
摘 要:疏散仿真模拟是研究隧道安全的重要方式。现有公路隧道疏散仿真模拟研究均假定不同车型在各车道分布比例是均匀的,忽视了各车道车型分布差异及车辆随机分布对疏散时间的影响。该文提出了基于车道车型分布差异的隧道车辆随机布置算法,并开发了对应的公路隧道火灾及疏散模拟车辆随机布置(RAVT)系统。综合运用RAVT及疏散仿真模拟软件Pathfinder,以两车道隧道和三车道隧道为研究对象,共设置12种场景,进行240次模拟,分析了车辆极度拥堵(车距1.5 m)、拥堵(车距5 m)、非拥堵(车距60 m)情形下车道车型分布差异及车辆随机分布对疏散时间的影响。研究结果表明:车辆极度拥堵和拥堵时,车道车型分布差异及车辆随机分布对疏散时间的影响很大。在车辆数量及车型比例均相同的情况下,不同的车辆分布方式可对疏散时间造成较大的差异,疏散时间最大值和最小值相差百分比最大达59.76%。建议学者或工程师开展隧道疏散仿真模拟时须考虑车道车型分布差异及车辆停靠随机性的影响。该文研发的算法及系统、采用的疏散仿真模拟方法提升了隧道疏散仿真模拟的准确性和可靠性。[Objective]Evacuation simulation is an important method for studying tunnel safety.Previous studies on highway tunnel evacuation simulation have assumed a uniform distribution of various vehicle types across each lane.However,this overlooks the potential impact of differences in vehicle type distribution across lanes(DVTDLs)and random vehicle distribution on evacuation time.In practice,different vehicle types tend to gravitate toward specific lanes,and the volumes as well as personnel loads vary significantly among these vehicles.We propose an algorithm for the random arrangement of vehicles within a tunnel,considering DVTDLs and random vehicle distribution.Concurrently,we develop a system with randomly arranging vehicle types(RAVT).[Methods]Our proposed method randomizes the arrangement of vehicles using parameters such as the spatial coordinates of the numerical model of the tunnel,vehicle sizes,vehicle model ratios,and vehicle type distribution differences.We apply this algorithmic process to develop the RAVT system.This system,based on HTML5,CSS,and JavaScript,can quickly calculate the parameters of vehicle arrangements and personnel loads and automatically generate the corresponding fire dynamics simulator(FDS)codes.This feature enables efficient and accurate vehicle arrangement in the numerical model of fire and evacuation of road tunnels.The FDS codes serve as a tool for modeling fires and can be directly imported into Pyrosim(a graphical tool integrated with FDS)and Pathfinder(a graphical tool for evacuation simulation).Using RAVT and Pathfinder,we established 12 scenarios featuring two-and three-lane tunnels as the subjects of our research.A total of 240 simulations were conducted.Our analysis focused on the effects of DVTDLs and random vehicle distribution on evacuation time under various conditions,ranging from extremely congested(vehicle spacing of 1.5 m),and normally congested(vehicle spacing of 5 m),to noncongested(vehicle spacing of 60 m).The lane model distribution ratios were set according to bot
关 键 词:公路隧道 车道车型分布 车辆随机分布 疏散仿真模拟
分 类 号:X951[环境科学与工程—安全科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13