基于变形网格的织物悬垂形态模拟  

Fabric drape profile simulation based on deformable mesh

作　　者：曹竞哲 陶晨 白琳琳 CAO Jingzhe;TAO Chen;BAI Linlin(College of Textile and Garment,Shaoxing University,Shaoxing,Zhejiang 312000,China)

机构地区：[1]绍兴文理学院纺织服装学院,浙江绍兴312000

出　　处：《纺织学报》2024年第6期59-67,共9页Journal of Textile Research

基　　金：教育部人文社会科学研究项目(23YJC760001);浙江省社科联合研究课题(No.75047);绍兴文理学院学生科研项目(Y20220703)。

摘　　要：为快速有效地模拟织物下垂过程、再现真实织物的悬垂形态解决织物约束形态的仿真问题,提出一个变形网格模型用于再现织物悬垂。在模型理论方面,围绕约束因子与衰减因子构建织物内部约束,通过接触-抵消机制复现织物柔性体与刚性平面的接触。在模型精度上,从网格规模和推演算法2个方面展开探讨,提出了合理的网格规模以达成效果与资源的平衡,并通过三阶泰勒展开减小了运算误差,提升了算法精度。本研究提出的变形网格模型,将悬垂视为动态变化的过程,实现了悬垂形态与悬垂过程的统一。模拟实验表明,真实织物内部的相互作用在模型理论及参数中得到了高度凝练的表达,体现模型特性的虚拟悬垂系数完整覆盖其实际取值区间,波纹不匀作为另一重要形态指标也得到充分表现,模型算法的精度较常规方法提升一个数量级。Objective In allusion to the stitch of constrained fabric simulation,this paper proposes a deformable mesh for reproducing the drape profile of fabric.Aiming to represent the dynamic process rather than static form of the fabric drape,the mesh model is featured with kinetic parameters and an evolution process to enable shape change over time.Method In the mesh model,the constraints inside the fabric were built up through a constraint factor as well as an attenuation factor,and the contact between the fabric flexible body and the rigid plane was performed with a Touch-Counteract mechanism.The forces on the particles in the mesh,which were calculated with mesh deformation,were then used to generate the further displacement of the mesh.The evolution of the mesh was brought up by step-by-step iteration to introduce draping kinetics of the virtual fabric.Results The drape profile of virtual fabric is achieved as the evolution processs meets its steady state.The drape coefficient is then worked out through identifying and quantifying the projection area of the mesh.The impact of the constraint factor and the attenuation factor on the drape coefficient are investigated,which has revealed the features and range of the model parameters capability.With lower attenuation factor(e=0.6),larger drape coefficient can be brought about while the range of the drape is narrow,and the drape is mainly affected by the attenuation factor and the effect from the constraint factor is relatively minor.When the attenuation factor grows(e=1.2 or e=2.4),smaller drape can be achieved while the range of the drape gets broader,and the constraint factor becomes more influential.When the attenuation factor goes up to 3.6 plus,the range of the drape turns to shrink,and the influence from the constraint factor recedes again.The upper limit of the range for the drape approximates 1.0 when the attenuation factor gets close to zero,and the lower limit of the range approaches 0 when the attenuation factor grows.Therefore,the theoretical range(0,1)of th

关 键 词：变形网格 织物模拟 织物悬垂 悬垂系数 悬垂不匀 

分 类 号：TP391.41[自动化与计算机技术—计算机应用技术]