考虑设计参数的角接触球轴承动态精度演变规律  

Dynamic accuracy’s evolutionary regularity of angular contact ball bearing based on design parameters

作　　者：季晔 王东峰[1] 薛玉君[2] 郑昊天 韩涛[1] JI Ye;WANG Dongfeng;XUE Yujun;ZHENG Haotian;HAN Tao(Luoyang Bearing Research Institute Company Limited,China National Machinery Industry Corporation,Luoyang Henan 471039,China;School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang Henan 471003,China;School of Intelligent Manufacturing,Luoyang Institute of Science and Technology,Luoyang Henan 471023,China)

机构地区：[1]中国机械工业集团有限公司洛阳轴承研究所有限公司,河南洛阳471039 [2]河南科技大学机电工程学院,河南洛阳471003 [3]洛阳理工学院智能制造学院,河南洛阳471023

出　　处：《航空动力学报》2024年第6期228-237,共10页Journal of Aerospace Power

基　　金：国家重点研发计划项目(2020YFB2007303);国家自然科学基金(U1809221);河南省高等学校重点科研项目(22A460005)。

摘　　要：为了确定成品轴承精度是否满足设计要求,合套和拆套是必然工序,不仅耗费工时,还可能引起滚动体和套圈划伤,致使产品精度下降,甚至丧失。根据角接触球轴承工作状态运动学和几何学关系,建立依据零件精度要素的接触角、径向跳动和轴向跳动的解析模型,提出动态精度计算方法,研究不同加工阶段轴承精度变化趋势,系统分析沟曲率半径、沟底直径、球直径及与之相关的精度要素与动态精度的关系。计算结果表明:沟底直径对接触角影响显著,为了满足设计要求,加工后可分组选配;误差幅值增大,径向和轴向跳动增大,几乎呈线性关系;球数对旋转精度影响不大,但会影响运行的稳定性。成品轴承动态精度检测数据与计算结果一致,说明模型准确合理,故通过零件设计参数检测即可得出动态精度是否满足运行要求,无需合套和拆套工序,有利于提升产品合格率和生产效率。Discussions were performed to determine whether the accuracy of finished bearing could meet the design requirements,as the assembly and disassembly as inevitable processes not only consume working hours,but also may cause scratches on the rolling element and ring,resulting in the decline or even loss of product accuracy.According to the kinematic and geometric relationship of the angular contact ball bearing at condition in motion,based on the accuracy elements of parts,the analytical models of contact angle,radial runout and axial runout of inner ring of assembled bearing were established,the calculation method of dynamic accuracy was proposed,the variation trends of bearing accuracy in different processing stages were studied,and the relationship between groove curvature radius,groove bottom diameter,ball diameter and related accuracy elements and dynamic accuracy was systematically analyzed.The calculation results showed that the groove bottom diameter had a significant influence on the contact angle.In order to meet the design requirements,selection in groups was required after machining;When the error amplitude increased,the radial and axial runout increased almost linearly;The number of balls had little effect on the rotation accuracy,but it affected the stability of operation.The dynamic accuracy test data of the finished bearing were consistent with the calculation results,which indicated that the model was accurate and reasonable.Therefore,whether the dynamic accuracy meets the operation requirements can be obtained through the test of the parts’design parameters.There is no need for the sleeve assembly and disassembly,which is conducive to improving the qualification rate and production efficiency.

关 键 词：角接触球轴承 动态精度 误差幅值 径向跳动 轴向跳动 

分 类 号：V229.2[航空宇航科学与技术—飞行器设计] TH113[机械工程—机械设计及理论]