冷轧变形对0Cr18Ni9奥氏体不锈钢组织与力学性能的影响  

Effect of Cold Rolling Deformation on Microstructure and Mechanical Properties of 0Cr18Ni9 Austenitic Stainless Steel

作　　者：王东东 WANG Dongdong(College of Applied Engineering,Henan University of Science and Technology,Sanmenxia 472000,China;Sanmenxia Polytechnic,Sanmenxia 472000,China)

机构地区：[1]河南科技大学应用工程学院,河南三门峡472000 [2]三门峡职业技术学院,河南三门峡472000

出　　处：《热加工工艺》2024年第9期84-86,90,共4页Hot Working Technology

基　　金：河南省科技攻关项目(182107000017);河南省社科联调研课题项目(SKL-2016-493)。

摘　　要：采用OM、SEM、XRD、维氏硬度计、万能试验机等研究了不同变形量冷轧对热轧态0Cr18Ni9奥氏体不锈钢组织与力学性能的影响。结果表明:随着冷轧变形量的增加,0Cr18Ni9不锈钢晶粒变形越来越明显,晶界处位错塞积不断加剧,晶界越来越模糊,组织中越来越多的奥氏体转变为马氏体。随着冷轧变形量的增加,0Cr18Ni9不锈钢的硬度、抗拉强度、屈服强度均逐渐升高,伸长率逐渐下降。冷轧变形量36%的0Cr18Ni9不锈钢的硬度、抗拉强度、屈服强度均达到最大值,分别为432.3 HV、1283.1MPa、1195.2 MPa。The effect of cold rolling with different deformation amounts on the microstructure and mechanical properties of hot rolled 0Cr18Ni9 austenitic stainless steel was studied by OM,SEM,XRD,Vickers hardness tester and universal testing machine.The results showthat with the increase of cold rolling deformation amount,the grain deformation of 0Cr18Ni9 stainless steel becomes more and more obvious,the dislocation deposit at grain boundary becomes more and more serious,the grain boundary becomes more and more fuzzy,and more and more austenite in the microstructure changes to martensite.With the increase of cold rolling deformation amount,the hardness,tensile strength and yield strength of 0Cr18Ni9 stainless steel increase gradually,while the elongation decreases gradually.The hardness,tensile strength and yield strength of 0Cr18Ni9 stainless steel with 36%cold rolling deformation reach themaximumvalue,which are 432.3 HV,1283.1MPa and 1195.2MPa,respectively.

关 键 词：0Cr18Ni9奥氏体不锈钢 冷轧变形量 微观组织 力学性能 

分 类 号：TG335.3[金属学及工艺—金属压力加工]