GCr15轴承钢套圈开裂失效分析  

Cracking Failure Analysis of GCr15 Bearing Steel Ring

作　　者：柯炜 马昂昂 KE Wei;MA Angang(Quality Inspection Institute of Qingdao Special Iron and Steel Co.Ltd.,Qingdao 266409,China)

机构地区：[1]青岛特殊钢铁有限公司质量检测所,山东青岛266049

出　　处：《甘肃冶金》2024年第3期93-96,共4页Gansu Metallurgy

摘　　要：针对GCr15轴承钢套圈失效原因进行了检测分析。结果表明:轴承套圈所使用的GCr15轴承钢化学成分符合相关国家标准要求,在试样表面发现了多处表面缺陷的存在,增大了材料在反挤压工序中的开裂风险,致使在反挤压过程中出现开裂失效,根据缺陷宏观形貌、金相分析及电镜分析,此试样失效原因为圆钢表面折叠缺陷所致,材料基体存在表面缺陷是造成材料失效的主要原因。The failure causes of GCr15 bearing steel rings were analyzed.The results show that the toughening composition of GCr15 bearing used in the bearing ring meets the requirements of relevant national standards.Multiple surface defects were found on the surface of the sample,which increased the cracking risk of the material during the back extrusion process,resulting in cracking failure during the back extrusion process.According to the macroscopic morphology,metallographic analysis and electron microscope analysis of the defects,the failure of the sample is caused by the surface folding defect of round steel,and the surface defect of the material matrix is the main reason for the failure of the material.

关 键 词：GCR15轴承钢 反挤压 表面缺陷 氧化物圆点 

分 类 号：TG115[金属学及工艺—物理冶金]