污水中痕量磷快速处理技术研究  

Research on Rapid Treatment Technology for Trace Phosphorus in Wastewater

作　　者：柴珊 Chai Shan(Linfen Environmental Emergency and Complaint Handling Center,Linfen Shanxi 041000,China)

机构地区：[1]临汾市环境应急与环境投诉受理中心,山西临汾041000

出　　处：《山西化工》2024年第6期237-238,287,共3页Shanxi Chemical Industry

摘　　要：为了解决目前单一除磷药剂除磷效率低、工艺流程复杂、成本高的不足,提出了一种复配除磷药剂,对不同除磷药剂复配方案进行了实验验证。结果表明,采用10 g/L的硫酸亚铁和8 g/L的PFS溶液按3∶1的体积比进行复配,反应时按2 mL的量投加、混凝转速设置为190 r/min、混凝时间设置为60 s,絮凝时间设置为15 min、沉淀时间设置为30 min时的总磷去除率为99.61%,比传统单一除磷药剂除磷率提升了0.71%,而且处理后的水体为中性,无需进一步处理,显著提升了除磷率和除磷经济性。In order to address the shortcomings of low phosphorus removal efficiency,complex process flow,and high cost of a single phosphorus removal agent,a compound phosphorus removal agent was proposed,and experimental verification was conducted on different compound phosphorus removal agent schemes.The results showed that the total phosphorus removal rate was 99.61%when 10 g/L ferrous sulfate and 8 g/L PFS solution were mixed in a 3:1 volume ratio,with a dosage of 2 mL during the reaction,a coagulation speed of 190 r/min,a coagulation time of 60 s,a coagulation time of 15 min,and a sedimentation time of 30 min,which increased the phosphorus removal rate by 0.71%compared to traditional single phosphorus removal agents.Moreover,the treated water was neutral and did not require further treatment,significantly improving the phosphorus removal rate and phosphorus removal economy.

关 键 词：除磷药剂 复配 总磷去除率 

分 类 号：X703[环境科学与工程—环境工程]