550kV HPL柱式断路器地震模拟振动台抗震试验研究  

A study of seismic simulation of shaking table test for 550kV HPL column circuit breaker

作　　者：李建赢 张国伟[1] 秦昌安 Li Jian-ying;Zhang Guo-wei;Qin Chang-an(Beijing Higher Institution Engineering Research Center of Civil Engineering Structure and Renewable Material,Beijing University of Civil Engineering and Architecture,Beijing 100044,China;China Academy of Building Research,Beijing 100013,China)

机构地区：[1]北京建筑大学工程结构与新材料北京高等学校工程研究中心,北京100044 [2]中国建筑科学研究院有限公司,北京100013

出　　处：《工程抗震与加固改造》2024年第3期81-85,80,共6页Earthquake Resistant Engineering and Retrofitting

摘　　要：对550kV HPL柱式断路器原型进行模拟地震振动台试验研究。试验通过白噪声动态特性扫频及标准人工波的抗震性能测试,得到了断路器的动力特性、关键部位的加速度响应与应变响应,并计算分析了位移差值及安全系数。试验现象及数据分析结果表明550kV HPL柱式断路器结构设计合理,绝缘子动应变峰值最大值出现在其根部为2182με,换算安全系数为2.35,满足规范规定抗震性能要求,本次试验可为同类电力设施性能研究提供借鉴。The simulated seismic shaking table test of the prototype of 550kV HPL column circuit breaker was carried out.In the test,the dynamic characteristics and the seismic performance of standard artificial wave of circuit breaker were tested.The acceleration and strain response of key parts of the circuit breaker were obtained,and the displacement difference and safety factor were calculated and analyzed.Through a combination of test and analysis,it shows that the structure design of 550kV HPL column circuit breaker is reasonable,the strain of the root of the lower support insulator is 2182με,and the converted safety factor is 2.35.The test results can meet the seismic performance requirements stipulated in the code.This test can provide reference for the seismic performance research of similar power facilities.

关 键 词：550kV HPL柱式断路器 振动台试验 抗震性能 

分 类 号：TM561[电气工程—电器]