渤海某终端处理厂天然气脱硫脱碳用消泡剂合成及评价  

SYNTHESIS AND EVALUATION OF DEFOAMER FOR NATURAL GAS DESULFURIZATION AND DECARBONIZATION AT A TERMINAL TREATMENT PLANT IN BOHAI SEA

作　　者：胡廷 宋晓莉 邓志强 陆原 王翔 张勇 Hu Ting;Song Xiaoli;Deng Zhiqiang;Lu Yuan;Wang Xiang;Zhang Yong(CNOOC Ener-Tech Oilfield Chemical Co.,Ltd.,Tianjin 300451,China)

机构地区：[1]中海油(天津)油田化工有限公司,天津300451

出　　处：《精细石油化工》2024年第4期47-50,共4页Speciality Petrochemicals

基　　金：天津市科技领军企业重大创新项目“海上油气田增储上产油气水处理关键化学品研究”(22YDLQGX00020)。

摘　　要：研制了一种以聚醚改性硅油/硅脂为主剂的天然气脱硫脱碳溶液用消泡剂,测试了其在不同发泡液、温度下的消泡性能。结果表明:贫胺液加入100 mg/L自制消泡剂即可达到应用需求;富胺液需加注超过1 000 mg/L才能满足应用要求。消泡剂加量1 000~1 500 mg/L时,在不同实验温度下可以满足现场应用要求,消泡效果明显优于现场在用有机硅乳液型消泡剂和收集的聚醚型胺液消泡剂。A defoaming agent for natural gas desulfurization and decarburization solution using polyether modified silicone oil/silicone grease as the main agent was developed,and the defoaming performance was tested at different foaming solutions and temperatures.The results show that adding 100 mg/L of self-made defoamer to the lean amine solution can meet the application requirements.Rich amine solution needs to be filled with more than 1000 mg/L to meet the application requirements.When the defoamer dosage is 1000-1500 mg/L,it can meet the on-site application requirments at different experimental temperatures.The defoaming effect is obviously better than that of the silicone emulsion defoamer and polyether amine defoamer collected on site.

关 键 词：天然气脱硫脱碳 混合聚醚改性聚硅氧烷 胺液消泡剂 加注浓度 渤海 

分 类 号：TQ264.1[化学工程—有机化工]