基于WPF的超高轻钢龙骨隔墙工程计量研究  

Engineering Metrology Study of Ultra-high Light Steel Keel Partition Wall Based on WPF

作　　者：赵慧 王亮 Zhao Hui;Wang Liang(Beijing University of Civil Engineering and Architecture,Beijing 100044,China)

机构地区：[1]北京建筑大学土木与交通工程学院,北京100044

出　　处：《土木建筑工程信息技术》2024年第3期60-64,共5页Journal of Information Technology in Civil Engineering and Architecture

基　　金：北京市自然科学基金面上项目(编号:8202011)。

摘　　要：在普通轻钢龙骨隔墙中内置型钢骨架以满足超高隔墙的性能要求,但由于工程体量庞大和构造复杂,工程量的精确计算尤为困难。本文结合《轻钢龙骨石膏板隔墙、吊顶》(GJCT-015/07CJ03-1)深入研究龙骨的排布规律,在不依赖于三维模型的前提下,创建WPF应用程序,采用C#语言编制计量程序,实现超高轻钢龙骨隔墙工程量的快速计算,提高了算量效率。最后以某实际工程为例,将程序计算工程量与手算工程量进行比对,量差率均控制在较小的范围内,表明本程序计算工程量具备较高的准确性。The section steel skeleton is built in the ordinary light steel keel partition wall to meet the performance requirements of the ultra-high partition wall.However,as for the large volume and complex structure,it is difficult to realize the accurate calculation of engineering quantities.Therefore,combined with the “Light Steel Keel Gypsum Board Partition Wall and Ceiling”(07CJ03-1),this paper explores the arrangement law of keel without relying on the three-dimensional model and further creates WPF application by employing C# language to compile measurement rules,which finally realizes the rapid calculation of the engineering quantity of ultra-high light steel keel partition wall and improves the takeoff efficiency.The data of an actual project is extracted in the paper.Comparing the exported engineering quantity with the consumption calculated according to the specification,the error of the results meets the requirements.

关 键 词：工程计量 轻钢龙骨 超高隔墙 型钢骨架 WPF技术 

分 类 号：TU17[建筑科学—建筑理论]