涂层类安全气囊织物的性能探讨  

Research on the performance of coated airbag fabric

作　　者：朱震杰 王正球 秦兆琼 李南南 ZHU Zhenjie;WANG Zhengqiu;QIN Zhaoqiong;LI Nannan(Dongli Jiuyi Textile and Dye(Nantong)Limited Company,Nantong 226000,China)

机构地区：[1]东丽酒伊织染(南通)有限公司,江苏南通226000

出　　处：《染整技术》2024年第7期25-28,共4页Textile Dyeing and Finishing Journal

摘　　要：研究了生产实际中的液态硅橡胶组分、涂层张力、循环风机转速、涂层速度和搅拌方式等条件因素对涂层类安全气囊织物性能的影响。结果表明:涂层类安全气囊织物生产过程中,提高液态硅橡胶B组分比例、提高涂层张力、增大循环风机转速、降低涂层速度和手动搅拌液态硅橡胶有利于提高撕破强力和断裂强力。提高液态硅橡胶B组分比例、降低涂层张力、增大循环风机转速、降低涂层速度和手动搅拌液态硅橡胶有利于降低静态透气性。The influence of factors such as liquid silicone rubber components,coating tension,speed of the circulating fan,coating speed,and stirring method on the performance of coated airbag fabrics in actual production is studied.The results indicate that in the production process of coated airbag fabrics,the tear strength and tensile strength of coated airbag fabrics are improved during the production process by increasing the proportion of component B in the liquid silicone rubber,coating tension,speed of the circulating fan,while reducing the coating speed and manually stirring the liquid silicone rubber.Increasing the proportion of component B in the liquid silicone rubber,speed of the circulating fan,and reducing the coating tension and coating speed,as well as manually stirring the liquid silicone rubber,are beneficial for reducing the static air permeability.

关 键 词：涂层 安全气囊 撕破强力 断裂强力 静态透气度 

分 类 号：TS195[轻工技术与工程—纺织化学与染整工程]