检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:俞徐林 Yu Xuin(Sinopec Jianghan Petroleum Engineering Design Co.,Ltd.,Wuhan 430000,China)
机构地区:[1]中石化江汉石油工程设计有限公司,湖北武汉430000
出 处:《广东化工》2024年第12期80-82,共3页Guangdong Chemical Industry
摘 要:随着地层压力逐渐降低,川渝地区页岩气田加密调整时,压裂返排出现支撑剂回流、返吐现象,一方面降低支撑裂缝的导流能力,另一方面支撑剂进入地面给设备带来冲刷损坏。为从源头上控制地层出砂,开展主控因素分析,为页岩气井立体防砂措施提供参考依据。通过改善支撑剂的铺置剖面,增加压裂液粘度、优化单段射孔簇数、加入纤维等优化措施,有效降低支撑剂回流风险。并对放喷测试制度进行优化调整,采用由小到大的油嘴顺序进行放喷。并针对不同程度出砂气井,形成“一井一策”差异化治理措施,提出旋流过滤式除砂器工艺,除砂器纵向上整体采用“内窄外宽”设计,有效避免堵塞缝腔,对粒径≥0.6 mm粉砂除砂效率达到98%。With the gradual decrease of formation pressure,proppant backflow and regurgitation occur during the infill adjustment of shale gas fields in Sichuan and Chongqing areas,which on the one hand reduces the conductivity of propped fractures,and on the other hand,proppant enters the ground and brings scouring damage to equipment.In order to control the formation sand production from the source,analyze the main control factors and provide reference for the three-dimensional sand control measures of shale gas wells.By improving the laying profile of proppant,increasing the viscosity of fracturing fluid,optimizing the number of single-stage perforation clusters,adding fibers and other optimization measures,the risk of proppant backflow is effectively reduced;The blowout test system is optimized and adjusted,and the blowout is carried out in order of nozzles from small to large;Aiming at gas wells with different degrees of sand production,a differentiated treatment measure of“one well and one strategy”is formed,and a Swirl filter desander process is put forward.The desander is designed as a whole with“narrow inside and wide outside”in the longitudinal direction,which effectively avoids blocking the fracture cavity,and the desanding efficiency of silty sand with particle size≥0.6 mm reaches 98%.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33