小型化高隔离度射频滤波模组设计研究  

A High-Speed and Low-Voltage Differential Signaling Driver

作　　者：彭佳红 王玺 谭玉婷 陈焱杰 余怀强[1] PENG Jiahong;WANG Xi;TAN Yuting;CHEN Yanjie;YU Huaiqiang(The 26th Research Institute of China Electronics Technology Group Corporation,Chongqing 400060,P.R.China)

机构地区：[1]中国电子科技集团公司第二十六研究所,重庆400060

出　　处：《微电子学》2024年第2期351-354,共4页Microelectronics

摘　　要：围绕射频滤波模组设计开展研究,针对模组小型化高集成度设计中的射频信号传输及隔离问题,进行了内部关键电路结构的精细化三维电磁场建模仿真分析,以提高模型的准确度。通过关键结构制作及去嵌测试,验证了仿真设计的准确性。并加工了一款尺寸为14.97 mm×12.01 mm×1.29 mm的L波段射频滤波模组,该滤波模组集成滤波器数量为16个,插入损耗≤5.20 dB,带外抑制≥42.5 dB。This paper focuses on the design of RF filtering front-end module.In view of the RF signal transmission and isolation problems involved in the miniaturized and highly integrated design of the module,a refined three-dimensional electromagnetic field modeling simulation analysis is carried out to improve the model accuracy.In order to verify the simulation design accuracy,the key structural model are fabricated and de-embedding tested.And an L-band miniaturized RF filtering front-end module has been fabricated.The module size is 14.97 mm×12.01 mm×1.29 mm.The number of the integrated filters is 16.The insertion loss is≤5.2 dB,and the out-of-band rejection is≥42.5 dB.

关 键 词：射频滤波模组 隔离度 去嵌测试 带外抑制 

分 类 号：TN713[电子电信—电路与系统]