基于数值模拟的薄壁机匣铸造工艺设计与优化  

Casting Process Design and Optimization of Thin-Walled Case Based on Numerical Simulation

作　　者：马月姣 牛俊涛 谢君[1] 孙元[1] 崔岳峰 吴浩 仉凤江 柴宏宇 李金国[1] MA Yue-jiao;NIU Jun-tao;XIE Jun;SUN Yuan;CUI Yue-feng;WU Hao;ZHANG Feng-jiang;CHAI Hong-yu;LI Jin-guo(Shi-changxu Innovation Center for Advanced Materials,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,Liaoning,China;AECC Shenyang Engine Research Institute,Shenyang 110015,Liaoning,China)

机构地区：[1]中国科学院金属研究所,师昌绪先进材料创新中心,辽宁沈阳110016 [2]中国航发沈阳发动机研究所,辽宁沈阳110015

出　　处：《铸造》2024年第7期1024-1030,共7页Foundry

基　　金：国家科技重大专项(J2019-VI-0018-0133);2020年中国科学院青年创新促进会项目(2020198)。

摘　　要：根据某大型复杂环形薄壁机匣铸件的结构特征及工艺性分析,设计了特征件铸造工艺,并利用有限元分析软件对铸件充型凝固过程进行了数值模拟。根据数值模拟结果,预测了可能产生缺陷的部位,并对浇注和补缩系统进行了改进。最后通过特征件工艺试验,验证了数值模拟结果的准确性和改进方案的可行性。According to the structural characteristics and its process property analysis for a large complex annular thin-walled case casting,the casting process for a characteristic part was designed,and the mold filling and solidification processes of the characteristic part casting were numerically simulated by finite element analysis software.The positions of defects possibly generated were predicted based on the numerical simulation results,and the gating and feeding systems were optimized.Finally,the accuracy of the numerical simulation results and feasibility of the improvement scheme were verified through the process tests of the characteristic parts.

关 键 词：高温合金 机匣特征件 铸造工艺 数值模拟 

分 类 号：TG24[金属学及工艺—铸造]