煤柱群回采沿空掘巷护巷煤柱尺寸研究  

Research on the Size of Entry Protection Coal-pillar in Goaf Driven Roadway During Coal Pillar Group Mining

作　　者：王远东[1,2] 徐大龙 顾伟 Wang Yuandong;Xu Dalong;Gu Wei(Shanxi Jinmei Group Zezhou Tian'an Haitian Coal Industry Co.,Ltd.,Shanxi Zezhou 048012;State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology,Jiangsu Xuzhou 221116)

机构地区：[1]山西晋煤集团泽州天安海天煤业有限公司,山西泽州048012 [2]中国矿业大学煤炭资源与安全开采国家重点实验室,江苏徐州221116

出　　处：《山东煤炭科技》2024年第7期17-22,28,共7页Shandong Coal Science and Technology

基　　金：国家自然科学基金项目(52274103)。

摘　　要：以赵庄煤矿五盘区煤柱回收工作面为研究背景,通过理论计算得到了沿空掘巷煤柱的留设尺寸应不小于4.1 m,并采用数值模拟对掘巷及回采期间不同宽度煤柱的围岩应力及塑性区进行了分析,数值模拟方案设计了4 m、5 m、6 m、17 m、18 m、19 m、20 m及25 m共8种煤柱尺寸留设方案,最终确定了煤柱的最优合理尺寸为19 m。现场矿压监测结果表明,留设宽度为19 m的护巷煤柱且进行合理支护后,沿空巷道围岩稳定性得以提高,可以满足工作面安全生产要求,实现五盘区残余煤柱的安全高效回收。Taking the coal pillar recovery working face in the fifth panel of Zhaozhuang Coal Mine as the research background,the theoretical calculation showed that the reserved size of coal pillars along the goaf should not be less than 4.1 m.Numerical simulation is used to analyze the surrounding rock stress and plastic zone of coal pillars with different widths during excavation and mining.The numerical simulation scheme designed a total of 8 reserved coal pillar sizes,including 4 m,5 m,6 m,17 m,18 m,19 m,20 m,and 25 m.Finally,the optimal reasonable size of coal pillars is determined to be 19 m.The on-site mine pressure monitoring results show that after leaving a 19 m wide coal pillar for roadway protection and providing reasonable support,the stability of the surrounding rock of the goaf roadway can be improved,which can meet the safety production requirements of the working face and achieve safe and efficient recovery of residual coal pillars in the five panel area.

关 键 词：残余煤柱群 煤柱尺寸 沿空掘巷 应力演化 矿压监测 

分 类 号：TD822.3[矿业工程—煤矿开采]