150 t转炉底吹工艺布置研究  

Study on Layout of 150 t Converter Bottom Blowing Process

作　　者：谷莹 Gu Ying(Masteel Special Steel Company,Ma'anshan Anhui 243000,China)

机构地区：[1]马钢股份公司,安徽马鞍山243000

出　　处：《安徽冶金科技职业学院学报》2024年第2期17-19,共3页Journal of Anhui Vocational College of Metallurgy and Technology

摘　　要：介绍了某钢厂150转炉的底吹特点。根据水模试验,本文分析不同布置下底吹强度、不同布置下顶吹强度、不同布置下枪位对混匀时间的影响。最终确定了合理的底吹工艺布置,为双环不对称布置(内环≈0.45 D,外环≈0.55D)。The characteristics of bottom blowing of 150 t converter in a steel plant are introduced.According to the water model test,the influences of the bottom blowing strength,the top blowing strength and the gun position on the mixing time under different arrangement are analyzed.Finally,the reasonable bottom blowing process arrangement was determined,which was double ring asymmetric arrangement(inner ring≈0.45 D,outer ring≈0.55D).

关 键 词：氧气转炉 转炉底吹 水模试验 

分 类 号：TF713[冶金工程—钢铁冶金]