CFRP对称层合板等效弹性模量参数敏感性研究  

Study on Parameter Sensitivity of Equivalent Elastic Modulus of CFRP Symmetric Laminates

作　　者：张二庆 王绪超 赵鑫 胡艳志 王旭 马志魁[4] ZHANG Erqing;WANG Xuchao;ZHAO Xin;HU Yanzhi;WANG Xu;MA Zhikui(Shanghai Shangchen Yutong Precision Equipment Co.,Ltd.,Shanghai 201611,China;Shaoxing Research Institute,Shanghai University,Shaoxing 312071,China;School of Materials Science and Engineering,Shanghai University,Shanghai 200444,China;School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China)

机构地区：[1]上海尚辰宇通精密装备有限公司,上海201611 [2]上海大学绍兴研究院,浙江绍兴312071 [3]上海大学材料科学与工程学院,上海200444 [4]武汉理工大学材料科学与工程学院,湖北武汉430070

出　　处：《材料开发与应用》2024年第3期99-109,共11页Development and Application of Materials

摘　　要：实际工程结构设计中往往将复合材料层合板看成均匀的各向异性板,并用等效弹性模量来表征层合板的刚度。为便于表征复合材料层合板的弹性性能,本研究从理论计算和ANSYS ACP仿真模拟两方面研究单层工程弹性常数与刚度系数的关系、[0/90]_(S)正交对称层合板的等效弹性模量、准各向同性层合板的等效弹性模量和铺层顺序对对称层合板等效弹性模量的影响。结果表明,单层工程弹性常数与刚度系数有较为简单的对应关系;[0/90]_(S)正交对称层合板的等效弹性模量约为单层正轴弹性模量E_(L)与E_(T)之和的一半;准各向同性层合板的等效弹性模量约为E_(L)与E_(T)之和的三分之一;改变铺层顺序后,层合板的等效弹性模量没有发生变化,但对层合板的弯曲刚度有较大影响;并用理论验证有限元解法的合理性,为复合材料层合板的应用设计提供了理论和仿真模拟指导。Composite laminates are often regarded as homogeneous anisotropic plates in practical engineering structure design,and the stiffness of laminates is characterized by equivalent elastic modulus.In order to characterize the elastic properties of composite laminates,the relationship between engineering constant and stiffness coefficient of the single-layer material,the equivalent elastic modulus of[0/90]_(S) orthogonal symmetrical laminates,the equivalent elastic modulus of quasi-isotropic laminates and the effect of stacking sequence on the equivalent elastic modulus of symmetrical laminates are studied by theoretical calculation and ANSYS ACP simulation.It is fount out that there is a simple correspondence between the single-layer engineering elastic constant and stiffness coefficient.The equivalent elastic modulus of[0/90]_(S) orthogonal symmetric laminates is about half of the sum of single-layer on-axis engineering constants E_(L) and E_(T) on the main directions.The equivalent elastic modulus of the quasi-isotropic laminate is about one-third of the sum E_(L) and E_(T) on the main directions.The equivalent elastic modulus of laminated plate does not change after changing the ply drop order,but the ply drop order has a great influence on the bending stiffness of laminated plate.The rationality of the finite element method is verified by the theoretical calculation.This study can provide theoretical and simulation guidance for the application design of composite laminates.

关 键 词：ANSYS ACP 仿真模拟 对称层合板 等效弹性模量 

分 类 号：TB332[一般工业技术—材料科学与工程]