基于预补偿的缸孔型线优化设计及其密封特性研究  

Profile Optimization Design and Sealing Performance Research of Cylinder Holes Based on Pre-compensation

作　　者：毕玉华[1] 谢巧巧 祖菘 张国强[2] 张思泽 BI Yuhua;XIE Qiaoqiao;ZU Song;ZHANG Guoqiang;ZHANG Size(Yunnan Province Key Laboratory of Internal Combustion Engines,Kunming University of Science and Technology,Kunming 650500,China;Kunming Yunnei Power Co.,Ltd.,Kunming 650217,China;Yunnan Province Yunnei Power Machinery Manufacturing Co.,Ltd.,Kunming 651700,China)

机构地区：[1]昆明理工大学云南省内燃机重点实验室,昆明650500 [2]昆明云内动力股份有限公司,昆明650217 [3]云南云内动力机械制造有限公司,昆明651700

出　　处：《内燃机工程》2024年第4期98-108,共11页Chinese Internal Combustion Engine Engineering

基　　金：国家自然科学基金项目(51765025)。

摘　　要：以某非道路高压共轨柴油机为研究对象,建立了螺栓–缸盖–缸垫–缸套–机体装配耦合模型,采用仿真分析与测试相结合的方式研究了工作状态下的缸套热机耦合失圆变形。基于缸套变形结果设计了锥形、瓶颈形、纺锤形、椭圆形、椭圆纺锤复合形5种具有不同型线特征的异形缸套预补偿方案,研究了不同异形缸套的热机耦合变形量、傅里叶变形幅值及其密封与摩擦性能。研究结果表明,在第三缸的101.8 mm截面处,椭圆形方案的最大径向变形量比原机缸套减小了15.42%;椭圆形缸套的窜气量与原机缸套相比减小了1.34%,其他方案的窜气量均比原机缸套大;与原机缸套相比,纺锤形缸套和椭圆纺锤复合形缸套的机油消耗量减小了21.36%。Taking a non-road high-pressure common rail diesel engine as the research object,a bolt–cylinder head–cylinder gasket–cylinder liner–block assembly coupling model was established.The thermal-mechanical coupling out-of-round deformation of cylinder liner under working conditions was studied by combining simulation analysis and test.Based on the deformation results of the cylinder liner,5 kinds of special-shaped cylinder liner pre-compensation schemes(conical,bottleneck,spindle,elliptical,elliptical spindle composite)with different profile characteristics were designed.The thermo-mechanical coupling deformation,Fourier deformation amplitude,sealing and friction performance of different special-shaped cylinder liners were studied.The results show that at the 101.8 mm section of the third cylinder,the maximum radial deformation of the ellipse scheme is reduced by 15.42%compared with the original cylinder liner.The blow-by quantity of the elliptical cylinder liner is decreased by 1.34%compared to the original engine cylinder liner,while the blow-by quantity of other schemes is greater than that of the original engine cylinder liner.Compared to the original engine cylinder liner,the oil consumption of the spindle-shaped cylinder liner and the elliptical spindle compound-shaped cylinder liner is decreased by 21.36%.

关 键 词：柴油机 缸套变形 预补偿 方案设计 性能 

分 类 号：TK411.9[动力工程及工程热物理—动力机械及工程]