全自动兰伯恩橡胶磨耗试验机的使用研究  

Research on the usage of fully automatic lamborn rubber wear testing machine

作　　者：李帛儒 隗思傲 陈兆彬[1] 王晓建 Li Boru;Kui Siao;Chen Zhaobin;Wang Xiaojian(Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022,Jilin)

机构地区：[1]中国科学院长春应用化学研究所,中国科学院高性能合成橡胶及其复合材料重点实验室,吉林长春130022

出　　处：《橡塑技术与装备》2024年第8期31-35,共5页China Rubber/Plastics Technology and Equipment

基　　金：中国科学院C类先导专项子课题XDC06020301。

摘　　要：介绍一种全自动兰伯恩磨耗试验机(FPS)设备组件及其结构,试验不同砂纸目数、滑移率、滑石粉流量、载荷等因素对胎面胶磨损量及摩擦系数稳定性的影响。固定条件下,不同炭黑补强胎面胶的磨损体积相对平均偏差均可控制在5%以内,并且有明显的耐磨区分性。This article introduces a fully automatic Lambertian abrasion tester (FPS) equipment component and its structure,and tests the effects of different sandpaper mesh sizes,slip ratios,talc powder flow rates,loads,and other factors on the wear amount and friction coefficient stability of tire tread rubber.Under fixed conditions,the relative average deviation of the wear volume of different carbon black reinforced tread rubber can be controlled within 5%,and there is obvious wear differentiation.

关 键 词：磨耗试验机 胎面胶磨损 重复性 区分性 

分 类 号：TQ330.491[化学工程—橡胶工业]