Lateral ring compression test applied to a small caliber steel jacket:Identification of a constitutive model  

作　　者：Yann Coget Yael Demarty Christophe Czarnota Anthony Bracq Jean-Sebastien Brest Alexis Rusinek 

机构地区：[1]French-German Research Institute of Saint-Louis,5 Rue Du General Cassagnou,68300 Saint-Louis,France [2]Laboratoire d'Etude des Microstructures et de Mecanique des Materiaux(LEM3),CNRS,Universite de Lorraine,Arts&Metiers ParisTech,F-57000 Metz,France

出　　处：《Defence Technology（防务技术）》2024年第6期133-148,共16页Defence Technology

基　　金：co-funded by the Direction Générale de l'Armement (DGA);the French-German Institute of Saint Louis (ISL)。

摘　　要：The evolution of threats and scenarios requires continuous performance improvements of ballistic protections for armed forces.From a modeling point of view,it is necessary to use sufficiently precise material behavior models to accurately describe the phenomena observed during the impact of a projectile on a protective equipment.In this context,the goal of this paper is to characterize the behavior of a small caliber steel jacket by combining experimental and numerical approaches.The experimental method is based on the lateral compression of ring specimens directly machined from the thin and small ammunition.Various speeds and temperatures are considered in a quasi-static regime in order to reveal the strain rate and temperature dependencies of the tested material.The Finite Element Updating Method(FEMU)is used.Experimental results are coupled with an inverse optimization method and a finite element numerical model in order to determine the parameters of a constitutive model representative of the jacket material.Predictions of the present model are verified against experimental results and a parametric study as well as a discussion on the identified material parameters are proposed.The results indicate that the strain hardening parameter can be neglected and the behavior of the thin steel jacket can be described by a modeling without strain hardening sensitivity.

关 键 词：Full metal jacket ammunition Lateral ring compression Inverse identification Numerical simulation 

分 类 号：TG115.5[金属学及工艺—物理冶金] TJ5[金属学及工艺—金属学]