硝酸胍精制工艺的研究  

Study on the Fine Technology of Guanidine Nitrate

作　　者：余晓红 王钰斐 Yu Xiaohong;Wang Yufei(Zhejiang Zhengxin New Material Technology Co.,Ltd.,Jinhua 321000,China;Jinhua City Lai Yiyuan Environmental Protection Technology Development Co.,Ltd.,Jinhua 321000,China)

机构地区：[1]浙江正鑫新材料有限公司,浙江金华321000 [2]金华市莱逸园环保科技开发有限公司,浙江金华321000

出　　处：《广东化工》2024年第13期25-27,7,共4页Guangdong Chemical Industry

摘　　要：本论文介绍了当前采用传统路线双氰胺法合成的粗硝酸胍精制工艺进行探究,研究表明,无机碱的加入与活性炭的加入对粗硝酸胍精制工艺的影响较大。经过对各项工艺参数的试验,精制条件为:含量92%左右的粗产品硝酸胍在90℃~100℃的水温下溶解1 h左右,并加入0.030%~0.035%的活性炭除杂,降温后,在40.0℃左右加入0.030%的无机碱,在不断搅拌,结晶5 h后提纯脱水干燥,硝酸胍的含量可达到98.5%左右,基本达到优级品的标准。This paper presents the research that the addition of inorganic alkali and activated carbon has a great influence on the refining process of crude guanidine nitrate.After the study on various process parameters,the purification conditions are:92%of crude product nitrate guanidine was dissolved in the water temperature of 90℃~100℃for about 1 h,and 0.030%~0.035%activated carbon was added to the mixture.After cooling,0.030%inorganic alkali was added at 40.0℃under constant stirring,purified and dehydrated after 5 h of crystallization,the content of nitrate guanidine can reach about 98.5%,basically reaching the standard of excellent grade.

关 键 词：硝酸胍 精制 双氰胺 活性炭 无机碱 

分 类 号：TQ[化学工程]