5MW半直驱永磁风力发电机设计及关键特性研究  

Research on Design and Key Characteristics of 5MW Semi-direct-drive Permanent Magnet Wind Turbine Generator

作　　者：舒聪慧 李霞 刘中华 杨波 许欣 SHU Conghui;LI Xia;LIU Zhonghua;YANG Bo;XU Xin(SinoAzure Wind Power Co.,LTD.,Xiangtan Hunan 411101,China;National Key Laboratoryof Offshore Wind Power Equipment and Efficient Utilization of Wind Energy,Xiangtan Hunan 411101,China;Hunan Vocational Instituteof Technology,Xiangtan Hunan 411100,China)

机构地区：[1]湖南兴蓝风电有限公司,湖南湘潭411101 [2]海上风力发电装备与风能高效利用全国重点实验室,湖南湘潭411101 [3]湖南理工职业技术学院,湖南湘潭411100

出　　处：《微电机》2024年第7期60-66,共7页Micromotors

摘　　要：目前半直驱机型已成为风力发电机组陆上机型的研发重点,发电机作为重要的传动部件,其性能参数的合理性对传动链总成的影响极大。本文基于5.5 MW半直驱风力发电机,对其从空载特性、负载特性、短路特性等方面进行了仿真计算,对其他关键性参数进行了重点分析。根据齿槽转矩数据进行发电机定转子结构选型;通过对比单相、两相、三相短路故障下最大短路电流值进行退磁仿真;最后本文提出一种仿真方法计算出定子齿部电磁激振力,并通过Romax软件分析其对传动链总成的振动影响,为后续传动链设计及动力学研究提供了一定的理论与实践基础。At present,semi-direct drive models have become the focus of research and development for onshore wind turbine models.As an important transmission component,the rationality of the performance parameters of the generator has a great impact on the transmission chain assembly.This article was based on a 5.5 MW semi-direct drive wind turbine,and conducted simulation calculations on its no-load characteristics,load characteristics,short-circuit characteristics,and other key parameters,with a focus on analysis.Selected the structure of the generator stator and rotor based on the cogging torque data;Simulate demagnetization by comparing the maximum short-circuit current values under single-phase,two-phase,and three-phase short-circuit faults;Finally,this article proposed a simulation method to calculate the electromagnetic excitation force of the stator teeth,and analyzed its impact on the vibration of the transmission chain assembly through Romax software,providing a certain theoretical and practical basis for subsequent transmission chain design and dynamic research.

关 键 词：半直驱电机 齿槽转矩 短路 电磁力 

分 类 号：TM315[电气工程—电机]