高速角接触球轴承性能仿真及应用研究  

Performance Simulation and Application Research of High Speed Angular Contact Ball Bearing

作　　者：蒋聪 乔思佳 朱钰珏 JIANG Cong;QIAO Sijia;ZHU Yujue(AVIC Nanjing Mechanical and Hydraulic Engineering Research Center,Nanjing 211106,China;The Third Military Representative Office of the Air Force Equipment Department in Nanjing,Nanjing 210008,China;People's Liberation Army Naval Command College,Nanjing 210016,China)

机构地区：[1]中国航空工业集团公司金城南京机电液压工程研究中心,江苏南京211106 [2]空军装备部驻南京地区第三军事代表室,江苏南京210008 [3]中国人民解放军海军指挥学院,江苏南京210016

出　　处：《机械制造与自动化》2024年第4期177-181,共5页Machine Building & Automation

摘　　要：为了在轴承使用前分析研判其在特定工况下的承载工作能力,基于某型高速角接触球轴承的特定工况,分别从急加减速过程、非稳态工作时润滑状态、保持架动态特性和强度、最佳预紧力等4个方面开展仿真研究,针对出现的影响轴承稳定工作的现象进行分析,对该型轴承的实际工程使用给出了合理化建议。In order to analyze and evaluate the loading capability of bearings proir to their use under specific working conditions,based on a certain type of high speed angular contact ball bearings in the performance of the specific conditions,conducts simulation research respectively in terms of sharp deceleration process,unsteady lubrication state,maintained dynamic characteristics and strength and best pre-tightening force.The phenomenons affecting steady working of the bearrings are analyzed and the rationalisation proposals for the actual engineering use of the bearings of this type are given.

关 键 词：轴承 高速 性能 预紧力 振动 

分 类 号：TH133.3[机械工程—机械制造及自动化]