梯度硝基发射药制备过程安全风险分析  

Safety Risk Analysis of Nitro Gradiently Distributed Propellant Preparation Process

作　　者：梁昊[1] 王多良 孙倩 丁亚军[3] 李世影 李洪伟[1] 肖忠良 LIANG Hao;WANG Duo-liang;SUN Qian;DING Ya-jun;LI Shi-ying;LI Hong-wei;XIAO zhong-liang(School of Chemical and Blasting Engineering,Anhui University of Science and Technology,Huainan 232001,China;China Explosive Materials Trade Association,Beijing 100000,China;School of Chemistry and Chemical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China)

机构地区：[1]安徽理工大学化工与爆破学院,安徽淮南232001 [2]中国爆破器材行业协会,北京100089 [3]南京理工大学化学与化工学院,江苏南京210094

出　　处：《含能材料》2024年第8期804-810,I0002,共8页Chinese Journal of Energetic Materials

基　　金：安徽高校自然科学研究项目(2022yjrc17);国家自然科学基金(22205111)。

摘　　要：梯度硝基发射药(NGDP)作为一种新型发射药,具有高氧平衡、低发射有害现象以及抗迁移的特性。为了分析NGDP制备过程热危险性,利用反应量热仪(RC1mx)、差式扫描量热仪(DSC)和加速绝热量热仪(ARC)测定了双基球扁药脱硝反应过程中的放热以及反应前后物料的热分解行为。结果表明:反应体系的绝热温升(ΔT_(ad))为58.28℃;脱硝反应使双基球扁药的初始分解温度从191.33℃提高至194.16℃;通过脱硝反应产物体系的ARC测试数据,获得了最大反应速度到达时间(TMR_(ad))和温度之间的关系,计算出绝热诱导期为24h时所对应的温度T_(D24);反应的T_(D24)、技术最高温度MTT与理论最高可达温度MTSR分别为137.2,108℃和128.52℃。基于精细化工反应安全风险评估规范,该反应在冷却失效的情况下,体系有冲料的风险,但触发二次放热分解反应的风险较低。Nitro gradiently distributed propellant(NGDP),as a new type of propellant,has the characteristics of high oxygen balance,less harmful for use,and anti-migration.To analyze the thermal hazard of denitration reaction in the preparation process of NGDP,the exothermic process during the denitration reaction and the thermal decomposition behavior of the material,the reaction was measured by reaction calorimeter(RC1mx),differential scanning calorimeter(DSC)and accelerated adiabatic calorimeter(ARC).The results showed that the exothermic amount of the denitration reaction was 61.46 kJ,and the adiabatic temperature rise(ΔT_(ad))of the reaction system calculated from this was 58.28℃.In the DSC test,the denitration treatment increased the decomposition temperature of the double base propellant from 191.33℃to 194.16℃.Based on the ARC test data of the post-reaction system,the relationship between the Time to Maximum Rate(TMR_(ad))and the temperature was calculated.When the adiabatic induction period is 24 hours,the corresponding T_(D24) is 137.2℃.The T_(D24),maximum technical temperature(MTT),and maximum temperature of the synthesis reaction(MTSR)of the reaction are 137.2,108℃,and 128.52℃,which means that the system had the risk of spraying in case of cooling failure.However,the risk of triggering the secondary decomposition reaction was low.

关 键 词：梯度硝基发射药 脱硝反应 反应安全性 反应量热 热分析动力学 

分 类 号：TJ55[兵器科学与技术—军事化学与烟火技术] O64[理学—物理化学]