高工作温度碲镉汞红外探测器杜瓦结构研究  

Research on dewar structure of mercury cadmium telluride infrared detector at high operating temperature

作　　者：张利明[1] 李艳红 冯志攀 宋淑芳 付志凯[1] 王冠 张磊[1] ZHANG Li-ming;LI Yan-hong;FENG Zhi-pan;SONG Shu-fang;FU Zhi-kai;WANG Guan;ZHANG Lei(th Research Institute of CETC,Beijing 100015,China)

机构地区：[1]中国电子科技集团公司第十一研究所,北京100015

出　　处：《激光与红外》2024年第7期1081-1085,共5页Laser & Infrared

摘　　要：随着第三代红外探测器技术的快速发展,高工作温度红外探测器成为重要的发展方向。本文报道了在高工作温度碲镉汞红外探测器杜瓦结构小型化、低功耗、高可靠性方面的研究进展。通过杜瓦结构的优化设计,搭配旋转整体式低温制冷机K562S short,制备出组件体积为80 mm×61 mm×39 mm,重量为212 g,启动时间为2.5 min,工作温度达到150 K的高工作温度中波碲镉汞红外探测器,并初步完成了组件可靠性试验验证,为高工作温度碲镉汞红外探测器的工程化应用奠定了一定的基础,对高工作温度碲镉汞红外探测器的小型化、低功耗、高可靠性研究具有一定的指导意义。With the rapid development of the third generation infrared detector technology,high operating temperature infrared detector has become an important development direction.This paper reports the research progress of the 11th Institute of CETC.in the miniaturization,low power consumption and high reliability of Dewar structure of high operating temperature tellurium cadmium mercury infrared detector.Through the optimized design of the Dewar structure,combined with the rotary integral cryogenic chiller K562S short,the component volume is 80 mm×61 mm×39 mm,and the weight is 212 g.The HOT component of medium wave cadmium tellurium mercury infrared detector with a starting time of 2.5 min and a working temperature of 150 K has been preliminarily completed,which has laid a certain foundation for the engineering application of high working temperature cadmium tellurium mercury infrared detector,and has certain guiding significance for the miniaturization,low power consumption and high reliability research of high working temperature cadmium tellurium mercury infrared detector.

关 键 词：高工作温度 碲镉汞 红外探测器 小型化 低功耗 可靠性 

分 类 号：TN215[电子电信—物理电子学] TN74