检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吕佳博 张健[2] 杨东澎 杨俊杰 赵斌[2] 孙景睿 任太阳 张宇[2] 莫晓旭 侯天野 LV Jia-bo;ZHANG Jian;YANG Dong-peng;YANG Jun-jie;ZHAO Bin;SUN Jing-rui;REN Tai-yang;ZHANG Yu;MO Xiao-xu;HOU Tian-ye(Jilin Province Key Laboratory of Measuring Instrument and Technology,Jilin Institute of Metrology,Changchun 130022,China;School of Opto-electronic Engineering,Changchun University of Science and Technology,Changchun 130022,China;School of Artificial Intelligence,Changchun University of Science and Technology,Changchun 130022,China;Jilin Public Security Bureau Traffic Patrol Police Detachment,Changchun 132001,China)
机构地区:[1]吉林省计量测试仪器与技术重点实验室,吉林省计量科学研究院,吉林长春130022 [2]长春理工大学光电工程学院,吉林长春130022 [3]长春理工大学人工智能学院,吉林长春130022 [4]吉林市公安局交通巡逻警察支队,吉林长春132001
出 处:《激光与红外》2024年第7期1130-1135,共6页Laser & Infrared
基 金:吉林省科技发展计划项目(No.20230201053GX)资助。
摘 要:基于最优传输理论的光线映射方法,针对非对称的照明的光学系统设计需求,以光源到辐照面距离为20 mm,在范围50 mm×50 mm范围内实现字母“JL”为目标,计算了面向零扩展度光源自由曲面光学系统初始参数,在此基础上利用LightTools软件优化设计并仿真分析了面向零扩展度光源和扩展光源的自由曲面光学系统,结果表明:面向零扩展度光源时,自由曲面直径为86.52 mm,光源与自由曲面距离为34 mm,在辐照面上可以实现字母“JL”的照度分布调控;面向直径为10 mm的扩展光源时,自由曲面直径为435.16 mm,光源与自由曲面距离为242 mm时,在辐照面上可以实现字母“JL”的照度分布调控,说明所设计系统可以实现非对称照明分布调控,有效的提高了自由曲面光学系统的设计效率。Based on the light mapping method of optimal transmission theory,the initial parameters of the free-form optical system for zero extension light source are calculated for the design of the optical system for asymmetric illumination,with the distance from the light source to the irradiated surface of 20 mm,and the realization of the letter“JL”within the range of 50 mm×50 mm as the target.The initial parameters of the free-form optical system for zero extension light source are calculated,and based on this,the free-form optical system for zero extension light source and extended light source is optimally designed and simulated using LightTools software.The results show that for zero extension light source,the free-form surface diameter is 86.52 mm,the distance between the light source and the free-form surface is 34 mm,and the illumination distribution control of the letter“JL”can be realized on the irradiated surface;when facing the extended light source with a diameter of 10mm,the diameter of the free surface is 435.16 mm,the distance between the light source and the free surface is 242 mm,and the illumination distribution control of the letter“JL”can be achieved on the irradiated surface,indicating that the designed system can realize the asymmetric illumination distribution control and effectively improve the efficiency of the design of the free-form optical system.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.79