高热值固废焚烧炉炉排片优化研究  

Research on Optimization of Grate Plate in High Heat Value Solid Waste Incinerator

作　　者：韩兆玉 郭镇宁 HAN Zhaoyu;GUO Zhenning(Everbright Environmental Technology(China)Co.,Ltd.,Nanjing 211102,Jiangsu,China)

机构地区：[1]光大环境科技(中国)有限公司,江苏南京211102

出　　处：《工业锅炉》2024年第4期8-12,23,共6页Industrial Boilers

摘　　要：为研究高热值固废焚烧空冷炉排片高温下性能,利用CFD模拟计算方法对优化后新结构空冷炉排片进行了数值计算,模拟结果表明,在相同的炉膛温度条件下,新结构炉排片相比原炉排片,表面温度降低幅度最大值超80℃,表面平均温度降低幅度均在20℃以上,降温效果明显。经过现场炉排片替换试验,新型固定炉排片比原炉排片可稳定降温34℃左右,经过两年半稳定运行,新型炉排片均未发生损坏,使用寿命高于原炉排片。In order to study the performance of air-cooled grate plates for high heat value solid waste incineration,CFD simulation calculation method was used to calculate the optimized new structure air-cooled grate plates.The simulation results show that under the same furnace temperature condition,the maximum surface temperature of new structure grate plate decreases by more than 80℃,and the average surface temperature decreases by over 20℃compared with the original grate plate,a significant cooling effect has been indicated.After on-site grates replacement test,the temperature of the new fixed grates could be reduced by about 34℃on average compared with the original grates.After two and a half years of stable operation,the new grates have not been damaged and have a longer service life than the original grates。

关 键 词：高热值固废焚烧 炉排炉 空冷炉排片 优化设计 

分 类 号：TK223.2[动力工程及工程热物理—动力机械及工程]