Control of Nozzle Flow Using Rectangular Ribs at Sonic and Supersonic Mach Numbers  

作　　者：Vigneshvaran Sethuraman Parvathy Rajendran Sher Afghan Khan Abdul Aabid Muneer Baig 

机构地区：[1]School of Aerospace Engineering,Universiti Sains Malaysia,Engineering Campus,Nibong Tebal,Pulau Pinang,14300,Malaysia [2]Department of Mechanical and Aerospace Engineering,Faculty of Engineering,International Islamic University Malaysia,Kuala Lumpur,53100,Malaysia [3]Department of Engineering Management,College of Engineering,Prince Sultan University,P.O.Box 66833,Riyadh,11586,Saudi Arabia

出　　处：《Fluid Dynamics & Materials Processing》2024年第8期1847-1866,共20页流体力学与材料加工（英文）

摘　　要：This study deals with base pressure management in a duct for various values of the Mach number(M),namely,Mach number corresponding to sonic and four supersonic conditions.In addition to the Mach number,the nozzle pressure ratio(NPR),the area ratio,the rib dimension,and the duct length are influential parameters.The following specific values are examined at M=1,1.36,1.64,and 2,and NPRs between 1.5 and 10.The base pressure is determined by positioning ribs of varying heights at predetermined intervals throughout the length of the square duct.When the level of expansion is varied,it is seen that the base pressure initially drops for overexpanded flows and increases for under-expanded flows.When ribs are present,the flow field in the duct and pressure inside the duct fluctuate as the base pressure rises.Under-expanded flows can achieve a base pressure value that is suitably high without experiencing excessive changes in the duct flow in terms of static pressure if a rib height around 10%of the duct height close to the nozzle exit is considered.Rectangular rib passive control does not negatively affect the duct’s flow field.

关 键 词：Base pressure internal flows RIBS suddenly expanded flow wall pressure 

分 类 号：O35[理学—流体力学]