PCB生产废水处理工程实例  

A project example of PCB production wastewater treatment

作　　者：徐云龙 李向东 XU Yunlong;LI Xiangdong(Institute of Food and Drug Manufacturing Engineering,Guizhou Institute of Technology,Guiyang 550000,China;Suzhou Zhongsheng Environmental Remediation Company,Suzhou 215000,China)

机构地区：[1]贵州理工学院食品药品制造工程学院,贵阳550000 [2]苏州中晟环境修复有限公司,江苏苏州215000

出　　处：《工业用水与废水》2024年第4期82-86,共5页Industrial Water & Wastewater

基　　金：苏州市水利水务科技项目(2019006)。

摘　　要：针对太湖流域某大型PCB生产企业排放的综合有机废水含有胺类、有机盐类、有机溶剂等特征污染物,采用了水解酸化-缺氧反硝化-好氧生化-辐流式沉淀池的组合工艺进行处理。经过调试投产运营后,在进水COD、氨氮、TN质量浓度分别为1200~1800、110~140、130~170 mg/L时,出水质量浓度分别为30~45、3.0~5.0、11~14 mg/L,出水TP质量浓度稳定在0.5 mg/L以下,相应去除率分别为97.5%、97.1%、91.7%、99%,出水水质稳定达到GB 18918—2002《城镇污水处理厂污染物排放标准》中的一级A标准。工程总投资3300万元,运维成本约为1.34元/t。As the wastewater discharged from a large-scale PCB production enterprise contains amine,organic salt,organic solvent and some other specific pollutants,a combined process of hydrolytic acidification-anoxic denitrification-aerobic biochemistry-radial flow sedimentation tank was adopted for its treatment.After being debugged and put into operation,when the mass concentrations of COD,ammonia nitrogen,and TN in the influent water were 1200-1800,110-140,130-170 mg/L respectively,the mass concentrations of those pollutants in the effluent water were 30-45,3.0-5.0,11-14 mg/L respectively,the mass concentration of TP was below 0.5 mg/L and maintained stable,the removal rates of COD,ammonia nitrogen,TN and TP were 97.5%,97.1%,91.7%and 99%respectively,the effluent water quality stably met the requirement of level A grade 1 in GB 18918—2002 Discharge standard of pollutants for municipal wastewater treatment plant.The whole investment of the project was 33 million yuan,and the operation and maintenance cost was about 1.34 yuan/t.

关 键 词：印制电路板废水 综合有机废水 水解酸化 异养反硝化 好氧处理 混凝 辐流式沉淀池 

分 类 号：X703.1[环境科学与工程—环境工程] X781.1