SCR催化剂再生钨酸钠溶液中硫、硅、磷杂质的去除研究  

Study of Sulfur,Silicon,Phosphorus and Other Impurities Removal from SCR Catalyst Regenerated Sodium Tungstate Solution

作　　者：李伊娜 徐庆鑫 LI Yina;XU Qingxin(Kunming Metallurgical Research Institute Co.,Ltd.,Kunming,Yunnan 650031,China;Yunnan Key Laboratory for New Technology of Beneficiation and Metallurgy,Kunming,Yunnan 650031,China;State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals,Kunming,Yunnan 650031,China)

机构地区：[1]昆明冶金研究院有限公司,云南昆明650031 [2]云南省选冶新技术重点试验室,云南昆明650031 [3]有色金属强化冶金技术全国重点试验室,云南昆明650031

出　　处：《云南冶金》2024年第4期98-103,共6页Yunnan Metallurgy

基　　金：高性能铝基催化载体新材料制备技术研究及产业化(202207AC110011)。

摘　　要：为提高SCR催化剂再生过程中的产物钨酸钠中所含硅、磷、硫杂质的去除效率,通过结合氧化脱硫法、镁盐法和明胶絮凝法,对含钨、钒的钨酸钠富集液进行净化后探究了沉淀剂的加入量、溶液的pH、反应时间及反应温度对杂质去除效率的影响,确定了最佳工艺参数。在最佳工艺参数条件下,S、Si、P的去除率分别达到92.3%、92.93%和39.23%,钨钒损失率低于10%。In order to improve the removal efficiency of silicon,phosphorus,sulfur and other impurities contained in sodium tungstate in the SCR catalyst regeneration process,by combining oxidative desulfurization,magnesium salt and gelatin flocculation,the effects of precipitant addition,pH,reaction time and reaction temperature on the impurity removal efficiency were investigated after purification of sodium tungstate-containing tungsten and vanadium-containing solution,to confirm the best process parameters.Under the best process parameters,the removal rate of S,Si and P can separately reach 92.3%,92.93%and 39.23%,the loss rate of tungsten vanadium is lower than 10%.

关 键 词：SCR催化剂 钨酸钠 S SI P 杂质脱除 

分 类 号：O643.362[理学—物理化学]