复合高精度计时起点的电池激活方法  

Battery Activation Method for Composite High-precision Timing Start Poit

作　　者：郭军献 刘皓 杨振兴 赵芯田 GUO Junxian;LIU Hao;YANG Zhenxing;ZHAO Xintian(No.212 Institute of China Ordnance Industry Corporation,Xi'an 710065,China;The Fourth Military Representative Office in Xi'an District of Army Equipment Department,Xi'an 710032,China)

机构地区：[1]中国兵器工业集团第二一二研究所,陕西西安710065 [2]陆装驻西安地区第四军代室,陕西西安710032

出　　处：《探测与控制学报》2024年第4期162-166,共5页Journal of Detection & Control

摘　　要：针对储备电池激活时间长、激活时间散布大(最大超过100 ms),电路部件以上电时刻为计时起点时,计时精度差的问题,提出一种复合高精度计时起点的电池激活方法。该方法在电激活方法的基础上复合了高精度计时起点产生电路,延期对电路部件输出计时起点。试验结果表明:该方法可以解决由于储备电池激活时间散布大,造成的电路部件以上电时刻为计时起点时,计时精度差的问题,计时起点精度可控制在2 ms以内。In order to solve the problems of long activation time,large activation spread(more than 100 ms)of reserve battery,and poor time accuracy of electrified time as the timing start poit of circuit,a composite high-precision time starting poit battery activation method was proposed.On the basis of the electrofusion method,the high-precision timing start poit generation circuit was combined with the out put timing start poit of the circuit component.The experimental results showed that this method could solve the problem of poor time reference precision of control circuit caused by large distribution of reserve battery activation time,and the timing start point was less than 2 ms.

关 键 词：储备电池 激活时间 直线发电机 计时起点 

分 类 号：TJ430.6[兵器科学与技术—火炮、自动武器与弹药工程]