基于PLZT陶瓷的光控复合驱动光开关性能研究  

Performance research of optical switch with optical-controlledcomposite driving based on PLZT ceramic

作　　者：杨怡薇 刘亚风 刘春波[1] Yang Yiwei;Liu Yafeng;Liu Chunbo(School of Mechanical and Electrical Engineering,Henan University of Technology,Zhengzhou 450001,China)

机构地区：[1]河南工业大学机电工程学院,河南郑州450001

出　　处：《南京理工大学学报》2024年第4期530-536,共7页Journal of Nanjing University of Science and Technology

基　　金：河南省教育厅自然科学项目(23A460002);河南工业大学高层次基金(31401426)。

摘　　要：针对传统光开关静电驱动易引起电磁干扰等问题,该文提出了一种利用镧改性锆钛酸铅(PLZT)陶瓷光电特性的光控复合驱动方式。阐述了基于PLZT陶瓷能量转换的驱动机理,建立了扭臂式光开关的光控复合驱动数学模型,并得到了驱动电压和输出位移的表达式。在此基础上采用COMSOL Multiphysics对光开关进行有限元仿真,利用所搭建的光学平台实验装置,对不同光照强度下的驱动性能进行理论、仿真和实验的对比分析。结果表明,光开关不同部位上的电势及电场线分布均匀,证明了模型结构设计的合理性。并且通过理论计算、仿真及实验研究验证了驱动数学模型的准确性,为开关控制提供理论基础。Aiming at the problem of electromagnetic interference easily caused in the traditional optical switch electrostatic driving,this paper proposes an optical-controlled composite driving method using the optoelectronic characteristics of lanthanum-doped lead zirconate titannate(PLZT)ceramic.The driving mechanism based on the energy conversion of PLZT ceramic is described,and a mathematic model of the optical-controlled composite driving of a twisted-arm optical switch is constructed.And the expressions of driving voltage and output displacement are obtained.Then,COMSOL Multiphysics is used to simulate the finite element of the optical switch,and the experimental setup of the optical platform is constructed to compare the theoretical,simulation and experimental analysis of the driving performance under different light intensities.The results indicate that the potential and electric field lines on different parts of the optical switch are uniformly distributed,which proves the rationality of the model structure design.And the accuracy of the driving mathematical model is verified by theoretical calculation,simulation and experimental study,which provides a theoretical basis for the switch control.

关 键 词：PLZT陶瓷 光开关 光电特性 光控复合驱动 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]