Spray characteristics of different regions downstream of a swirl cup  

作　　者：Donghui WANG Yong HUANG Hongzhou ZHANG 

机构地区：[1]Collaborative Innovation Center of Advanced Aero-Engine,School of Energy and Power Engineering,Beihang University,Beijing 102206,China [2]National Key Laboratory of Science and Technology,School of Energy and Power Engineering,Beihang University,Beijing 102206,China

出　　处：《Chinese Journal of Aeronautics》2024年第8期124-143,共20页中国航空学报（英文版）

基　　金：supported by the Provincial or Ministerial Level Project.

摘　　要：The spray characteristics of different regions downstream of swirl cups play a critical role in cold start and re-ignition of gas turbines.The spray measurements were performed at the fuel pressures of 0.5,0.8,1.0,1.5,and 2.0 MPa and the fuel temperatures of-23,-13,-3,7,17 and 27℃,respectively.The droplet size,droplet velocity,droplet number,and instantaneous spatial spray image of sprays from an aviation kerosene Jet-A were measured using a two-component phase Doppler particle analyzer and a digital off-axis holography system.As the fuel pressure and temperature increase,the Sauter Mean Diameter(SMD)and spray non-uniformity of the Spray Shear Layer(SSL)gradually decrease.As the fuel pressure increases,the SMD and spray non-uniformity of the Central Toroidal Recirculation Zone(CTRZ)gradually decrease,and the slopes of these curves both decrease.As the fuel pressure increases,the SMD and spray nonuniformity of the CTRZ rapidly decrease at the fuel temperature of23℃,while slightly decrease at the fuel temperature of 27℃.The droplets in the CTRZ come from 3 different sources:simplex nozzle,venturi,and outside the CTRZ.As the fuel pressure increases,the proportion of droplets recirculated from outside the CTRZ decreases.This study proposed the concept of the“pressure critical point”for the swirl cups.As the fuel temperature decreases,the proportion of droplets recirculated from outside the CTRZ increases below the critical pressure,while decreases above the critical pressure.In addition,through the models of liquid film formation and breakup on the curved cylindrical wall,a semi-theoretical model was established to predict the SMD of SSL for swirl cups.The prediction uncertainty of this model is less than 6%for all 14 conditions in this paper.

关 键 词：Swirl cup Sauter Mean Diameter(SMD) Spray non-uniformity Atomizing regions Semi-theoretical prediction Spray nozzles 

分 类 号：V231.2[航空宇航科学与技术—航空宇航推进理论与工程]