高温下金属材料组织及夹杂物变化过程的原位观察  

In-Situ Observation of Microstructure and Inclusions of Metal Materials at High Temperature

作　　者：杨春 YANG Chun(Technology Center of Jiuquan Iron and Steel(Group)Co.Ltd.,Jiayuguan 735100,China)

机构地区：[1]酒泉钢铁(集团)有限责任公司技术中心,甘肃嘉峪关735100

出　　处：《甘肃冶金》2024年第4期108-112,118,共6页Gansu Metallurgy

摘　　要：随着工业技术的不断发展,对新材料的研发也有了更高要求。利用高温共聚焦显微镜的显微成像系统对不锈钢和碳钢热轧钢板以一定范围内的升降温速率原位观察试样在加热和冷却过程中显微组织的变化,通过实验观察确定各阶段相变的起始和结束点、奥氏体晶粒变化全过程以及钢中夹杂物在钢液中的聚集、长大等行为。With the continuous development of industrial technology,the research and development of new materials has higher requirements.The microstructure changes of stainless steel and carbon steel hot rolled steel plates during heating and cooling were observed in situ with the microscope imaging system of high temperature confocal microscope.The starting and ending points of phase transformation at each stage,the whole process of austenite grain change,and the accumulation and growth of inclusions in molten steel were determined by experimental observation.

关 键 词：高温共聚焦显微镜 高温金相 原位观察 相变过程 夹杂物行为 

分 类 号：TG142.11[一般工业技术—材料科学与工程]