流线形激光织构对Ti6Al4V合金摩擦磨损性能的影响  

Effect of streamlined laser texture on friction andwear properties of Ti6Al4V alloy

作　　者：魏北朝 陈文刚[1,2] 郭思良 袁浩恩 周意皓 程家豪 陈红艳 刘伟 WEI Beichao;CHEN Wengang;GUO Siliang;YUAN Haoen;ZHOU Yihao;CHENG Jiahao;CHEN Hongyan;LIU Wei(College of Mechanical Engineering and Transportation,Southwest Forestry University,Kunming 650224,China;Academician Workstation ofDongyang Li,Kunming 650224,China)

机构地区：[1]西南林业大学机械与交通学院,昆明650224 [2]云南省Dongyang Li院士工作站,昆明650224

出　　处：《功能材料》2024年第8期8221-8229,共9页Journal of Functional Materials

基　　金：国家外专局高端外国专家引进计划(G2023039001L);云南省Dongyang Li院士工作站(202305AF150019);云南省外国人才引进专项-重点外国专家项目(202305AO350001)。

摘　　要：Ti6Al4V合金因同时具有众多优良的机械性能而成为机械中关键零部件的首选材料,然而,Ti6Al4V合金硬度低、耐磨性差等缺陷限制了其在机械领域更为广泛的应用。鉴于此,研究利用激光织构技术在Ti6Al4V合金表面制备流线形对称织构,在油润滑条件下,通过摩擦实验系统研究了不同参数激光流线形织构对Ti6Al4V合金材料耐磨性的影响。利用SEM、LICHEN电子天平等设备对不同样品表面的磨痕形貌、磨损量等进行表征。实验结果表明,当织构长度为400μm,深度为600μm时,样品的摩擦系数及磨损量较小,减摩效果更好。此外,研究还利用ANSYS Workbench软件对润滑油在织构表面的流动特性进行模拟,发现实验中摩擦系数的减小主要是润滑油在织构作用下流速、流向发生变化导致油膜压力增大而引起的。油膜压力增大能提高油膜的承载力,有效降低摩擦副的摩擦系数。Ti6Al4V alloy has become the preferred material for key components in machinery due to its many excellent mechanical properties,however,the defects of Ti6Al4V alloy such as low hardness and poor wear resistance limit its wider application in the mechanical field.In view of this,the laser texture technology was used to prepare a streamlined symmetrical texture on the surface of Ti6Al4V alloy,and the effects of laser streamline texture with different parameters on the wear resistance of Ti6Al4V alloy material were studied by friction test system under oil lubrication conditions.SEM and LICHEN electronic balance equipment were used to characterize the wear scar morphology and wear amount on different sample surfaces.The experimental results show that when the texture length is 400μm and the depth is 600μm,the friction coefficient and wear of the sample are smaller,and the friction reduction effect is better.In addition,ANSYS Workbench software was used to simulate the flow characteristics of lubricating oil on the texture surface,and it was found that the decrease of friction coefficient in the experiment was mainly caused by the increase of oil film pressure caused by the change of flow velocity and flow direction of lubricating oil under the action of texture.The increase of oil film pressure can improve the bearing capacity of the oil film and effectively reduce the friction coefficient of the friction pair.

关 键 词：TI6AL4V合金 激光织构技术 耐磨性 ANSYS Workbench 

分 类 号：TH117[机械工程—机械设计及理论]