基于逆向工程的摩托车挡泥板的快速成型  

Rapid Prototyping of Motorcycle Fenders Based on Reverse Engineering

作　　者：马朝平 陈亚茹 李亚玲 徐邦荣 Ma Chao-ping;Chen Ya-ru;Li Ya-ling;Xu Bang-rong(Chongqing Vocational and Technical University of Mechatronics,Chongqing 400000)

机构地区：[1]重庆机电职业技术大学,重庆400000

出　　处：《内燃机与配件》2024年第15期37-39,共3页Internal Combustion Engine & Parts

摘　　要：以挡泥板为研究对象,运用逆向工程和快速成型技术,详细展示了其整个重构设计和快速成型过程。通过三维激光扫描设备进行实物数据采集,然后将点云数据导入Geomagic wrap软件进行处理,接着,利用Geomagic DesignX软件进行模型重构,最终,通过3D打印技术得到了与原件契合度较高的挡泥板样品。采用逆向工程设计的挡泥板能够显著缩短产品的设计研发周期,提高效率。本文的研究结果对其他产品的设计研发具有一定的参考价值。In this article,the motorcycle fender is used as the research object,and the entire reconstruction design and rapid prototyping process are demonstrated in detail using reverse engineering and rapid prototyping technology.The physical data is collected using a three-dimensional laser scanning device,and then the point cloud data is imported into the Geomagic wrap software for processing.Subsequently,the model reconstruction is carried out using the Geomagic DesignX software.Finally,a fender sample with a high degree of fidelity to the original is obtained through 3D printing technology.The fender designed using reverse engineering can significantly shorten the design and development cycle of the product,improving efficiency.The research results of this article have certain reference value for the design and development of other products.

关 键 词：挡泥板 逆向工程 快速成型 模型重构 

分 类 号：U483[交通运输工程—载运工具运用工程]