针对夏热冬冷地区的新型承载蓄热超结构墙体力学性能与温控效能研究  

Investigation on Mechanical Properties and Temperature Control Efficiency of Novel Load⁃Bearing and Heat⁃Storing Metastructure Walls in Hot Summer⁃Cold Winter Regions

作　　者：姚翔宇 马建斌[1] 王飞娅[1] 杨肖虎[2] YAO Xiangyu;MA Jianbin;WANG Feiya;YANG Xiaohu(School of Architectural Engineering,Chongqing Water Resources and Electric Engineering College,Chongqing 402160,P.R.China;School of Human Settlements and Civil Engineering,Xi’an Jiaotong University,Xi’an 710049,P.R.China)

机构地区：[1]重庆水利电力职业技术学院建筑工程学院,重庆402160 [2]西安交通大学人居环境与建筑工程学院,西安710049

出　　处：《应用数学和力学》2024年第8期1047-1057,共11页Applied Mathematics and Mechanics

基　　金：重庆市教委科学技术研究项目(KJQN202303805,KJQN202103810)。

摘　　要：相变蓄热墙体能够有效降低室外温度波动对内墙面温度的干扰,提升室内热环境的稳定性并降低建筑能耗.由于冬夏季气象条件的差异,相变材料(phase change material,PCM)熔点的选择成为影响墙体热工性能的重要因素.为了实现蓄热墙体冬夏两季的高效利用,该研究构建了新型承载蓄热超结构墙体数值模型,对墙体力学性能进行检验,并模拟了冬季典型日和夏季典型日空气对流换热下墙体传热特性.结果表明,新型承载蓄热超结构墙体的力学性能满足工程应用需求,同时相较普通墙体具有良好的传热特性.其中,熔点为20℃的墙体在冬季热工性能最好,峰值相变率达到0.30,且内壁面最大温度波动为5.8℃,在夏季工况中,熔点为30℃的墙体具有较高的相变利用率为0.48,熔点为24℃的墙体内壁面温度波动最小.最后,综合考虑相变利用率和衰减倍数,获得了夏热冬冷地区最佳相变墙体熔点为24℃.A phase change material(PCM)heat-storing wall can effectively mitigate the impact of outdoor tem-perature fluctuations on internal wall surface temperatures,enhance the stability of the indoor thermal environ-ment,and reduce building energy consumption.The selection of the PCM melting point is crucial due to the dif-fering weather conditions in the winter and the summer.To optimize the performances of heat-storing walls for both seasons in hot summer-cold winter regions,a numerical model for a novel load-bearing and heat-storing metastructure wall incorporating multi-melting point PCMs was developed.This model was used to evaluate the mechanical properties and simulate the heat transfer characteristics of the wall under air convection heat trans-fer conditions on representative winter and summer days.The results demonstrate that,the mechanical proper-ties of the phase change thermal storing wall meet the engineering application requirements,and its heat trans-fer characteristics surpass those of ordinary walls.Specifically,the wall with a PCM melting point of 20℃ex-hibits superior thermal performance in the winter,with a peak phase transformation rate of 0.30℃and a maxi-mum inner wall temperature fluctuation of 5.8℃.In the summer,the wall with a PCM melting point of 30℃shows a higher phase transformation utilization rate of 0.48,while the wall with a melting point of 24℃experi-ences the lowest temperature fluctuation.Therefore,with both the utilization ratio and the attenuation ratio considered,the optimal melting point for a phase change wall would be 24℃.

关 键 词：承载蓄热墙体 相变材料 力学性能 温控效能 数值模拟 

分 类 号：TK02[动力工程及工程热物理] O341[理学—固体力学]