连退过程中不同钢种露点控制模型开发  

During the Continuous Retirement Process Different Steel Species Dew Point Optimization Model Development

作　　者：郑晓东 谭海龙 牛百草 翟雄 杨永辉 Zheng Xiaodong;Tan Hailong;Niu Baicao;Zhai Xiong;Yang Yonghui(Cold Rolling Plant of Zhanjiang Iron and Steel Co.,Ltd.,Zhanjiang 524072;National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University,Qinhuangdao 066004)

机构地区：[1]广东省湛江钢铁有限公司冷轧厂,广东湛江524072 [2]河北省燕山大学国家冷轧板带装备及工艺工程技术研究中心,河北秦皇岛066004

出　　处：《冶金设备》2024年第4期14-17,87,共5页Metallurgical Equipment

摘　　要：针对在连续退火阶段带钢生产过程中出现麻点及表面氧化色的缺陷,本文结合现场的增湿系统及生产参数,通过对RTF段和SF段露点进行优化从而改善麻点及表面氧化色的缺陷。主要通过收集现场数据,得到钢种参数、生产工艺参数、增湿系统喷嘴开度,根据钢种参数计算出不同钢种不同元素的摩尔浓度,根据生产工艺参数计算出表面溶解氧的浓度及相应元素的临界摩尔浓度。通过建立增湿系统喷嘴开度信息与炉内露点温度的关系,对喷嘴开度进行调节,进而完成露点温度的优化。在模型投入后表面麻点深度变浅,带钢产品合格率明显提高。For the defects of numbness points and surface oxidation during the continuous annealing stage,combined with the on-site hydrating system and production parameters,this article is optimized by optimizing the RTF segment and SF segment dew point Color defects.Mainly collecting on-site data,obtaining steel parameters,production process parameters,and moisturizing system nozzles.Calculate the Moore concentration of different steel types and different elements based on steel parameters,and calculate the concentration of surface dissolving oxygen according to the production process parameters and coresponding corresponding to the concentration of oxygen oxygen and corresponding correspondingly The critical Moore concentration of the element.By establishing the relationship between the opening of the nozzle of the moisture and the dew point temperature in the furnace,the nozzle opening degree is adjusted to complete the optimization of the dew point temperature.After the model is invested,the surface hemp is shallower,and the qualification rate of steel products has increased significantly.

关 键 词：连续退火 带钢 炉内气氛 露点 

分 类 号：TG115[金属学及工艺—物理冶金] TG307[金属学及工艺—金属学]