检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李潮流[1] 王长胜[2] 张文静[2] 王敏[1] 李高仁[2] 徐红军[1] Li Chaoliu;Wang Changsheng;Zhang Wenjing;Wang Min;Li Gaoren;Xu Hongjun(PetroChina Research Institute of Petroleum Exploration&Development;Research Institute of Exploration&Development,PetroChina Changqing Oilfield Company)
机构地区:[1]中国石油勘探开发研究院 [2]中国石油长庆油田公司勘探开发研究院
出 处:《中国石油勘探》2024年第4期156-165,共10页China Petroleum Exploration
基 金:中国石油天然气集团有限公司关键核心技术攻关项目“移动式井场岩样集成连续测量成像系统研制”(2021ZG07)。
摘 要:针对夹层型页岩油甜点测井评价难题,提出了从烃源岩品质参数、储层品质参数和二者的空间距离等多角度定量评价其耦合关系,实现了基于试油井资料刻度的夹层型页岩油产能分级和具有工业产能的“甜点”下限标准的确立,其可靠性得到多口井的验证。根据岩心地球化学实验分析数据建立基于测井资料定量计算烃源岩总有机碳含量的区域模型,并参考相关标准确定鄂尔多斯盆地陕北吴起地区延长组长7段有效烃源岩发育段。基于研究区砂岩储层的孔渗曲线计算储层品质因子,在此基础上确定待试油储层段与有效烃源岩的纵向最短距离,最终综合储层品质因子、平均TOC及有效烃源岩厚度等,构建能够反映试油层段与邻近主力烃源岩段耦合关系的源储耦合系数计算公式,根据已知井测试结果标定,在一个油田或一个井区确定能够获得工业油流的甜点段源储耦合系数下限,据此可以对新井待试油层段进行评估,避免无效试油,从而为提高非常规油气试油成功率、优化产能建设提供决策依据。In view of the difficulty in logging evaluation of the interlayered type shale oil sweet spots,a quantitative evaluation method has been proposed for the coupling relationship of source rock quality parameters,reservoir quality parameters,and their spatial distance,achieving the production capacity classification of the interlayered type shale oil and the determination of the lower limit standard for sweet spots with commercial oil flows after calibrated by well test data,which is reliable confirmed by multiple wells.Based on geochemical experimental data of core samples,a regional model for qualitative TOC calculation has been constructed by using logging data,and the effective source rock interval in the seventh member of Yanchang Formation in Wuqi area has been determined by referring to the relevant standards.The porosity-permeability relationship curve has been used to calculate the reservoir quality factor,and the vertical shortest distance between reservoir interval to be tested and effective source rock has been determined.Finally,a formula for calculating source rock and reservoir coupling coefficient that reflects the coupling relationship between the tested interval and the adjacent main source rock has been established by combining with reservoir quality factor,average TOC and effective source rock thickness.After calibrated by well test results,the lower limit of coupling coefficient in an oilfield or a well area with commercial oil flows has been determined,which enables to evaluate intervals to be tested in new wells and avoid ineffective well testing,improving success rate of unconventional oil and gas well test and providing decision basis for the optimization of capacity construction.
分 类 号:TE122.1[石油与天然气工程—油气勘探]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49