检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:徐龙军 张建宇 靳超越 谢礼立 XU Longjun;ZHANG Jianyu;JIN Chaoyue;XIE Lili(State Key Laboratory of Precision Blasting,Jianghan University,Wuhan 430056,China;School of Digital Construction and Blasting Engineering,Jianghan University,Wuhan 430056,China;School of Civil and Hydraulic Engineering,Huazhong University of Science and Technology,Wuhan 430074,China;Institute of Engineering Mechanics,China Earthquake Administration,Harbin 150080,China)
机构地区:[1]江汉大学精细爆破国家重点实验室,湖北武汉430056 [2]江汉大学数字建造与爆破工程学院,湖北武汉430056 [3]华中科技大学土木与水利工程学院,湖北武汉430074 [4]中国地震局工程力学研究所,黑龙江哈尔滨150080
出 处:《自然灾害学报》2024年第4期139-151,共13页Journal of Natural Disasters
基 金:国家自然科学基金(地震联合)重点项目(U2139207);湖北省自然科学基金(创新群体)重点项目(2023AFA030)。
摘 要:强震断层地震动的破坏作用主要表现为断层破裂引起的方向性效应和断层盘间错动引起的滑冲效应。其中断层盘间的滑冲错动会使跨断层结构面临严峻的错断风险,是跨断层结构抗错断设计、分析和进行防灾减灾决策必须考虑的内容和前提。但目前有关跨断层工程结构设计地震动的确定尚缺乏统一的方法和规定。通过对近年来跨断层结构破坏机理研究中的输入地震动,尤其是模型试验中地震动的选取和加载方式的归纳与总结,分析了断层作用地震动选取和加载方法的特点与局限性。针对现阶段强震断层地震动选用和试验加载方式中存在的问题进行探讨,提出断层作用下设计地震动的选取思路和方法,以期为跨断层工程研究输入地震动的选用提供借鉴,也为强震断层地震动模拟方法的研究提供参考。The damage of fault ground motion is mainly manifested as the directivity effect caused by fault rupture and the fling-step effect caused by fault dislocation.Among them,the slip and thrust dislocation between fault plates will make the cross-fault structures face severe fault risks,which is the content and premise of the anti-fault design,analysis and disaster prevention and reduction decision of the cross-fault structures.However,there is still a lack of uniform methods and regulations for the determination of ground motion in cross-fault engineering structures design.Based on the induction and summary of the input ground motion in recent years,especially the selection and loading methods of ground motion in model tests,the characteristics and limitations of the selection and loading methods of fault induced ground motion are analyzed.This paper discusses the problems existing in the selection of ground motion and test loading methods of fault ground motion,and puts forward the selection ideas and methods of design ground motion under fault action to provide reference for the selection of ground motion input in cross-fault engineering research and for the research of fault ground motion simulation methods.
关 键 词:穿/跨断层土木工程 模型试验 断层错动 输入地震动 加载方式
分 类 号:P315.9[天文地球—地震学] P642.27[天文地球—固体地球物理学] X43[天文地球—地球物理学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49