检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王昊鑫 李硕 刘春晓 肖珍妮 赵志远 赵文婷[1,2] WANG Hao-xin;LI Shuo;LIU Chun-xiao;XIAO Zhen-ni;ZHAO Zhi-yuan;ZHAO Wen-ting(College of Bioscience and Resources Environment,Beijing University of Agriculture,Beijing 102206,China;North China Key Laboratory of Urban Agriculture,Ministry of Agriculture and Rural Affairs,Beijing 102206,China)
机构地区:[1]北京农学院生物与资源环境学院,北京102206 [2]农业农村部华北都市农业重点实验室,北京102206
出 处:《现代化工》2024年第S01期149-154,共6页Modern Chemical Industry
基 金:2022年度市属高校优秀青年人才培育计划项目(BPHR22203098);北京市教育工会支持项目(北京高校青年教师创教研工作室);2023农业农村部华北都市农业重点实验室开放课题项目;北京市教育委员会科学研究计划项目(KM202210020010);北京农学院青年教师科研创新能力提升计划(QJKC2022012);2023年北京农学院本科科研训练项目(KX20230105)。
摘 要:以咖啡渣为原料制备生物炭,研究不同温度下其对4种拟除虫菊酯类农药的吸附机理。对不同温度制备的生物炭的理化性质及表面性质进行研究;通过吸附效率实验选取最佳制备温度,再进行吸附动力学实验和等温吸附实验。实验结果表明,800℃为最佳制备温度,此时生物炭的吸附性能和芳香性更强,表面孔隙多,形变程度大;800℃制备的生物炭对拟除虫菊酯农药的吸附更符合准一级动力学模型,而吸附热力学过程更符合Freundlich模型。吸附热力学参数表明,800℃制备的生物炭对4种拟除虫菊酯农药的吸附均为自发的吸热过程。Biochar is made from coffee residue,and its adsorption mechanism on four kinds of pyrethroid insecticides is studied at different temperature.Firstly,the study is performed on the physicochemical and surface properties of biochar prepared at different temperature.Through adsorption efficiency experiments,the optimal preparation temperature is selected,followed by adsorption kinetics and isothermal adsorption experiments.Experimental results show that 800℃is the optimal preparation temperature.Biochar prepared at 800℃exhibits stronger adsorption performance and aromaticity,possesses more surface pores,and shows greater deformation degree.The adsorption of pyrethroid insecticides by biochar made at 800℃is more in line with the quasi first order kinetic model,while Freundlich model can better describe the adsorption thermodynamic process.The adsorption thermodynamic parameters indicate that the adsorption of four kinds of pyrethroid insecticides by biochar made at 800℃is a spontaneous endothermic process.
分 类 号:TH3[机械工程—机械制造及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.185