检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈晓贺 CHEN Xiaohe(No.5 Oil Production Plant of Daqing Oilfield Co.,Ltd.)
机构地区:[1]大庆油田有限责任公司第五采油厂,163000
出 处:《石油石化节能与计量》2024年第9期54-58,共5页Energy Conservation and Measurement in Petroleum & Petrochemical Industry
摘 要:系统效率不仅是反应油井整体工作状态和用电量的重要参数,还可以用来衡量抽油机井工作水平的高低。某油田目前系统效率偏低问题严重,单一的措施并不能使抽油机井达到最佳运行状态,只有系统分析,整体措施,才能有效提升系统效率。针对低效井,从地下、地面两个方向分析影响系统效率的因素,确定生产参数、沉没度、抽油机平衡、设备匹配为主要影响因素。分别从技术层面和管理层面采取参数整体优化、更换节能设备、功率法调平衡等相应措施,有效提升系统效率1.6~5.6个百分点,降低油井单耗,达到抽油机井平稳运行和节能降耗的目的。Not only does system efficiency reflect the main parameter of the overall working status and electricity consumption of oil wells,but also it measures the working level of pumping well.At present,due to the serious problem of low system efficiency in an oilfield,the single measure cannot enable the pumping well to achieve the optimal operation.Only by systematically analyzing the overall measures can system efficiency be effectively improved.In view of low efficiency wells,the factors affecting the system efficiency are analyzed from two directions,underground and surface,and it is determined that the production parameters,the submergence,the pumping balance and equipment matching are main factors.The corresponding measures including overall optimization of parameters,replacement of energy conservation equipment,and power method balancing are taken from both technical and management aspects,which effectively improves system efficiency by 1.6~5.6 percentage points,reduces the single consumption of oil well,and achieves smooth operation of pumping wells and energy conservation and consumption reduction.
分 类 号:TE933.1[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222