基于Workbench涡旋压缩机涡旋齿流-热-固多场耦合分析  

Multi-field Coupling Analysis of Scroll Teeth Flow-Heat-Solid for Scroll Compressors Based on Workbench

作　　者：袁维运 王楠楠 张立国 岳琪 张成 YUAN Wei-yun;WANG Nan-nan;ZHANG Li-guo;YUE Qi;ZHANG Cheng(Tuha Drilling Company,Xibu Drilling and Exploration Engineering Corporation Limited,Turpan 838200,China;School of Mechanical Engineering,Shandong University of Technology,Zibo 255000,China;Rizhao Port Shandong Wharf Co.,Ltd.,Rizhao 276800,China;Shandong Qineng Machinery Technology Co.,Ltd.,Zibo 255203,China)

机构地区：[1]中国石油西部钻探吐哈钻井公司,新疆吐鲁番838200 [2]山东理工大学机械工程学院,山东淄博255049 [3]日照港山钢码头有限公司,山东日照276800 [4]山东琪能机械科技有限公司,山东淄博255203

出　　处：《压缩机技术》2024年第4期20-27,共8页Compressor Technology

基　　金：山东省科技型中小型企业创新能力提升工程(2023TSGC0965)。

摘　　要：涡旋压缩机内部流场变化对涡旋齿受力变形情况具有重要影响。通过对涡旋压缩机进行流场分析,探究了压缩腔内压力、温度分布情况,并根据流场分析结果,对不同材质的动涡旋盘进行流-热-固多场耦合分析。研究表明:压缩腔的压力和温度在齿高方向并不相同;多场耦合下QT400-15比HT200更合适作为涡旋盘的制造材料;多场耦合下涡旋齿的最大应力出现在齿根部位,顶部变形最大;由于温度场载荷与气体力载荷所产生的主要应力与变形方向不同,因此温度场载荷和气体力载荷之间的叠加差值大于其耦合差值。The variation of flow field in the scroll compressor has an important effect on the deformation of scroll teeth.In this paper,the distribution of pressure and temperature in the compressor chamber was researched by analyzing the flow field of scroll compressor.Based on the results of flow field analysis,the fluid-heat-solid coupling analysis was carried out on the orbiting scroll of different materials.The research shows that the pressure and temperature of the compression cavity are not the same in the direction of tooth height.QT400-15 is more suitable than HT200 as the manufacturing material of scroll plates under multi-field coupling.Under multi-field coupling,the maximum stress of the scroll tooth appears at the root of tooth,and the top deformation is the largest.Due to the different stress and deformation directions caused by the temperature field load and the gas pressure load,the superimposed value of the temperature field load and the gas pressure load is greater than the coupling value.

关 键 词：涡旋压缩机 动涡旋盘 多场耦合 流场分析 应力变形 

分 类 号：TH45[机械工程—机械制造及自动化]