催化重整过程苯-甲苯分离体系的模拟与优化  

Simulation and optimization of benzene-toluene separation system in catalytic reforming process

作　　者：张广彤 韩德求 许凌子 张健[1] 邹雄 董宏光[3] ZHANG Guangtong;HAN Deqiu;XU Lingzi;ZHANG Jian;ZOU Xiong;DONG Hongguang(College of Petrochemical Engineering,Liaoning Shihua University,Fushun 113001,China;Yellow River Delta Chambroad Institute Co.,Ltd.,Binzhou 256600,China;School of Chemical Engineering,Dalian University of Technology,Dalian 116033,China)

机构地区：[1]辽宁石油化工大学石油化工学院,辽宁抚顺113001 [2]黄河三角洲京博化工研究院有限公司,山东滨州256600 [3]大连理工大学化工学院,辽宁大连116033

出　　处：《石油化工》2024年第9期1302-1308,共7页Petrochemical Technology

基　　金：教育部产学合作协同育人项目(221004650123048)。

摘　　要：针对催化重整装置中的苯-甲苯分离体系能量利用率低的问题,采用差压热耦合精馏技术及热泵精馏技术提高体系的能量利用率,并在差压热耦合精馏单元与热泵精馏单元之间进行热集成,充分利用体系中的余热。应用Aspen HYSYS V11流程模拟软件对优化前后的模型进行模拟计算和分析。模拟结果表明,在产品纯度和收率相同的条件下,采用热泵精馏、差压热耦合精馏和热集成3种节能技术的工艺与原工艺相比可使苯-甲苯分离体系能量节约23.33%。In view of the low energy utilization efficiency of benzene-toluene separation system in catalytic reforming unit,differential pressure thermal coupling rectification technology and heat pump rectification technology were used to improve the energy utilization efficiency of the system,and thermal integration between differential pressure thermal coupling rectification unit and heat pump rectification unit was carried out to make full use of waste heat in the system.Aspen HYSYS V11 process simulation software was used to simulate and analyze the model before and after optimization.The simulation results show that under the condition of the same purity and yield,the energy saving rate of the three energy-saving technologies including heat pump rectification,differential pressure thermal coupling rectification,and thermal integration can save energy of the benzene-toluene separation system by 23.33%compared with the original process.

关 键 词：热泵精馏 差压热耦合精馏 热集成工艺 模拟优化 

分 类 号：TQ028.3[化学工程]