固废墨泥对非极性三元乙丙橡胶和极性丁腈/氯化聚乙烯橡胶的协效增塑效果  

Synergistic plasticization of non-polar EPDM rubber and polar nitrile/chlorinated polyethylene rubber by solid waste ink mud

作　　者：李昱彤 关迎东[2] 边帅 赵帅 李琳 辛振祥[1] LI Yutong;GUAN Yingdong;BIAN Shuai;ZHAO Shuai;LI Lin;XIN Zhenxiang(College of Polymer Science and Engineering,Qingdao University of Science and Technology,Qingdao 266042,China;Marine Chemical Research Institute Co.,Ltd.,State Key Laboratory of Marine Coatings,Qingdao 266071,China;Hubei Sanjiang Aerospace Jianghe Chemical Technology Co.,Ltd.,Yichang 444200,China)

机构地区：[1]青岛科技大学高分子科学与工程学院,山东青岛266042 [2]海洋化工研究院有限公司海洋涂料国家重点实验室,山东青岛266071 [3]湖北三江航天江河化工科技有限公司,湖北宜昌444200

出　　处：《弹性体》2024年第4期35-41,共7页China Elastomerics

基　　金：国家自然科学基金资助项目(51603111,5170311);山东省自然科学基金面上项目(ZR2021ME107);中国博士后科学基金项目(2022M721903,2021M700553,2020M672014)。

摘　　要：将不同用量墨泥与不同牌号石蜡油和氯化聚乙烯进行配合,重点研究墨泥作为协效增塑剂对三元乙丙橡胶和丁腈/氯化聚乙烯橡胶增塑效果的影响。结果表明,非极性三元乙丙橡胶和极性丁腈/氯化聚乙烯橡胶的物理机械性能和硫化性能随着墨泥用量的增加有一定程度的提高,说明墨泥有软化增塑的作用且增塑效果较好。Different amounts of ink sludge were combined with different grades of paraffin oil and chlorinated polyethylene,focusing on the influence of ink sludge as a synergistic plasticizer on the plasticizing effect of EPDM and nitrile/chlorinated polyethylene rubber.The results show that the physical and mechanical properties and vulcanization properties of non-polar EPDM and polar nitrile/chlorinated polyethylene rubber are improved to a certain extent with the increase of the dosage of ink sludge,which indicates that ink sludge has a good softening and plasticizing effect.

关 键 词：墨泥 协效增塑剂 三元乙丙橡胶 丁腈/氯化聚乙烯橡胶 石蜡油 氯化聚乙烯 

分 类 号：TQ328[化学工程—合成树脂塑料工业]